|
D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
|
Thread Tools | Display Modes |
#31
|
||||
|
||||
Did the shims go back in ok Doug?
__________________
Confidence is the feeling you have before you know better . . . . Audi A8 D2 3.7 Quattro Sport 1999 FL - Melange 2nd Place Winner - A8-Freunde Annual German Meet 2012 at Edersee 20" x 9" Bentley GTC Wheels with 385mm W12 Front Discs & Bentley Caliper Covers, Front Lowered on Coilovers, Xenons, Combined DRLs and LED Foglights to modified OEM front fog lamp position, Alcantara/Leather, Full Black Alcantara headlining + pillars and blind shelf, Bespoke Flat Bottomed Sports Steering Wheel, Dark Myrtle Wood, Autodim Mirrors, Bose, Blinds, Digital TV, Ski Hatch, Modified rear exhaust section for extra V8 Burble Audi S8 D2 Final Edition 2002, Avus Silver with Red Leather Interior Tiptronic with Sport mode button, Sony rear entertainment package, Bose sound system, Audi Navigation Plus, 20 inch Final Edition alloys, Full Cat Back Stainless Milltek exhaust, giving a great V8 burble Audi A8L D2 4.2 Petrol with LPG - Ebony Black Audi A8L D4 FL 4.0T Petrol twin turbo - Havana Black Audi A2 1.6 FSi Sport - Dolphin Grey with Votex body kit and Red Leather Interior and some other A8's A8L's and Mercs |
#32
|
||||
|
||||
With some copper grease?
__________________
. Nite Blue 3.0L SE Quattro |
#33
|
|||
|
|||
Or could just be that the Pagid pads aren't as good as they used to be
How much of a lip was on the disc when you replaced the pads?
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#34
|
||||
|
||||
I think he replaced the discs too so it wouldn't be that. I've got Pagid pads and discs on mine and they've been fine but if the shims are not in right or not copper greased then you may get some noise
__________________
Confidence is the feeling you have before you know better . . . . Audi A8 D2 3.7 Quattro Sport 1999 FL - Melange 2nd Place Winner - A8-Freunde Annual German Meet 2012 at Edersee 20" x 9" Bentley GTC Wheels with 385mm W12 Front Discs & Bentley Caliper Covers, Front Lowered on Coilovers, Xenons, Combined DRLs and LED Foglights to modified OEM front fog lamp position, Alcantara/Leather, Full Black Alcantara headlining + pillars and blind shelf, Bespoke Flat Bottomed Sports Steering Wheel, Dark Myrtle Wood, Autodim Mirrors, Bose, Blinds, Digital TV, Ski Hatch, Modified rear exhaust section for extra V8 Burble Audi S8 D2 Final Edition 2002, Avus Silver with Red Leather Interior Tiptronic with Sport mode button, Sony rear entertainment package, Bose sound system, Audi Navigation Plus, 20 inch Final Edition alloys, Full Cat Back Stainless Milltek exhaust, giving a great V8 burble Audi A8L D2 4.2 Petrol with LPG - Ebony Black Audi A8L D4 FL 4.0T Petrol twin turbo - Havana Black Audi A2 1.6 FSi Sport - Dolphin Grey with Votex body kit and Red Leather Interior and some other A8's A8L's and Mercs |
#35
|
||||
|
||||
I bought a set of pads for my Range Rover last year, they squealed like a pig being slaughtered, removed them and applied more copper grease, no change. I finally bought another set of pads and not had a problem since.
Sometimes you can be unlucky and buy pads that seem to be noisy, best speak with ECP as there will be a warranty with them...
__________________
. Nite Blue 3.0L SE Quattro |
#36
|
||||
|
||||
I think I'm suffering a bit of this at the moment. The car's steering feels slightly heavier than usual and when I stop the car, occasionally the front N/S wheel feels hotter than the rest and there is an awful stink coming from it. There is noticeably more brake dust on that wheel that on the front O/S. Brake performance feels normal otherwise, but I know something is not quite right.
There seem to be a few local German car specialists in the area, and a few claiming to be Audi specialists. I doubt fixing a sticky calliper is really all that difficult but my trolley jack broke a few weeks ago, so I suspect taking it to a garage will be quicker and easier. Hopefully they won't have my eyes out for it! |
#37
|
|||
|
|||
Mine was sorted for the cost of 1 hours labour, its still fine to this day.
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles |
#38
|
||||
|
||||
I have the below garage in mind for sorting the issue. They are well known local VAG specialists, and they looked after my brother's tuned SEAT Leon Cupra R 225 when he had it. They're not too far away.
http://www.swiftmotorengineering.co.uk/find.html Someone on another forum recommended tapping the stuck brake assembly with a hammer. If I had a rubber hammer small enough to afford accuracy I may have been amenable to this idea. Any chance of it working? I can see the theory behind it, namely that it should dislodge the dirt stopping the calliper returning to it's usual position... |
#39
|
|||
|
|||
The problem with mine was that dirt had got attached to the sliders, the calliper was simply removed from the car and the sliders all cleaned up along with the calliper itself. The whole lot was then reassembled and tested, the amount of movement between it working and sticking is tiny, so I am not sure hitting it with a hammer will make much difference.
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles |
#40
|
||||
|
||||
I think taking it to the local garage will be my best bit. I've seen people tapping brake assemblies with rubber mallets and rubber hammers before trying to free up seized parts. But I'd rather my pride and joy was running smooth minus the hammers!
|
|
|