|
D3 - Wheels and Tyres Refurbing, center caps, tyre brands, tyrefitters - discuss it here |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Are these figures correct for d3
SIZE - 19x9.5
PCD - 5x112 OFFSET - 45 CENTRE BORE - 73.1 |
#2
|
|||
|
|||
Centre bore should be 57.1mm for D2 and D3 and 66.1mm for D4.
PCD is 5x112 for all. Width, diameter and offset will vary depending on wheels.
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure |
#3
|
||||
|
||||
For bore would use spigots.
I would like to fill up arches more and Offset is my concern as they are wider then original By chart up to 45 should be ok I guess only on the car I will find out |
#4
|
|||
|
|||
Sorry, I mis-understood that you asked for stock figures. Would have been more clear if you asked if the wheels with those parameters would fit on D3?
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure |
#5
|
||||
|
||||
Sorry
|
|
|