|
|
|||||||
| D3 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
 |
|
|
Thread Tools | Display Modes |
|
#1
5th November 2015, 05:24 PM
|
||||
|
||||
Wipers going cucu
So annoying, once at first setting they just go bazookas
When rains they seem not to recognise I cannot see a thing!!! When I move the sensor near rear mirror they start to work for a bit, then mind on their own I counted breaks between sequence 3s sometimes 15s I've got a replecement sensor - is it hard to change it? Probably thats why my auto lights are on all the time...same sensor right? 
|
|
#3
1st December 2015, 08:46 AM
|
||||
|
||||
|
Might help if you post this in the D3 section as I don't think any of the D2s had such magic!
__________________
2002 Final Edition S8. Ebony black with Silver Grey leather and myrtle wood trim. Current mods: solar sun roof, 20mm rear spacers, 15 mm on front, red brembo callipers, 6k headlights, rear view camera, engine remap, alloy dash dial rings, alloy navi rings, tt/phaeton pedal upgrade, (and custom matching foot rest) dension ipod interface & parrot hands free kit (both fully hidden), av input, tv in motion switched thro' PF switch in blanking plug right of steering column, Audi 'quattro' sill covers, repositioned centre console switches, radio clock, .Planned mods: auto-dimming rear view mirror, dash cam (as steamship's), fit the ski hatch, refit philips drl's (or maybe not - nope, definitely not - horrible botch!).
|
|
#4
1st December 2015, 11:39 AM
|
||||
|
||||
|
I was thinking the same thing, never heard of a D2 with a sensor.
Incidentally D2 wipers can go crazy too. If improperly tightened the speed settings go crazy and develop ultra slow mode of a wipe every 60 seconds or something, but weirdly faster settings still work? I would have thought slipping on the spined washer would cause wipers not to work at all, but simply tightening made it work again. Weird or what??
|
|
|
|
Linear Mode
