|
|
|||||||
| D2 - Sat Nav, ICE, Audio & TV All in car entertainment discussions |
 |
|
|
Thread Tools | Display Modes |
|
#1
25th February 2009, 06:20 AM
|
||||
|
||||
Nav Plus aluminium ring upgrade
Hi,
I mentioned this in previous posts but in the spirit of categorisation and classification thought i'd put it in here too so it can be added to the sticky. If you want to upgrade your NavPlus, Concert I or II with some aluminium rings to match the gear lever button and surround, Aluringe24.de is the place to buy them from... Site url: www.aluringe24.de eBay shop Cost - It was 19 GBP in Nov-08, they now (Feb-09) cost 25 GBP delivered. -Oli  
|
|
#2
25th February 2009, 06:41 AM
|
||||
|
||||
|
Done and Done
__________________
Conan (the Librarian) Watch it if you dare Currently, 2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block. 1997 4.2 A8SQ - the Projekt. 12 years and ongoing! 1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard 2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion. 2005 C5 Allroad 2.5TDi FE - Grey - Workhorse. 2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter. Previously 2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex 1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure. 1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex. 2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on. 1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8. And a list of non VAG going back 40 years before I saw the light.
|
|
#3
25th February 2009, 10:38 AM
|
||||
|
||||
A bit loose
Oli,
Have you stuck yours on the knobs in any way? Mine spin freely (they don't grip the knobs), and I have had to take them off for the minute. Will have to use a bit of double sided tape, I think. Zip PS: I know - this sound like a script to a porn movie... 
|
|
#4
25th February 2009, 02:35 PM
|
||||
|
||||
|
Hi Zip - mine went on without any need for tape or sticky stuff and sit very tightly on it.
Might be worth just bending the ring ever so slightly (or giving it slight knocks on the side with a small hammer) to get it to grip better. Hope that's useful... -Oli
|
|
|
|
Linear Mode
