|
Daily banter For everything, and anything that doesnt fit in elsewhere |
|
Thread Tools | Display Modes |
#28
|
|||
|
|||
Sunday's update on Monday. Mike came over and we did the gearbox service and reseal.
Clean sump pan, although the magnets are in the wrong places. Not much magnet fluff which is good. Sump off and filter removed Prime the oil pump inlet The left output flange was leaking badly This is held in place with a bearing and circlip Press tool to spread the load while pushing the shaft out It sits in the vice like this Pushed out. I can swap the seal and bearing, then put it back together New F125 Engine and box back together This evening I cleaned up and refitted the wiring harness and coolant hoses |
Thread Tools | |
Display Modes | |
|
|