The fluid in, or HP out, can't remember off hand which is which, misses the tranny brake, but if the shorter casting is fitted it would foul. Ive never actually seen the shorter pump adaptor casting except in the parts manual diagram, the one you have posted above. You can see that there is a much smaller gap between the flanges and the pump side is canted at an angle to miss the drum. The photo you posted above looks the same as mine though.
I also toyed with the idea of running the pump electrically, woul dbe pretty easy to fabricate but it would take up valuable space. There is an american company that makes engine driven pumps and PAS pump powered winches. Cant remember what they are called but they are meant to have an incredible pull.
|
4th October 2017, 05:47 PM
Threaded Mode