A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Engine Bay

D2 - Engine Bay Everything under the bonnet

Reply
 
Thread Tools Display Modes
  #1  
Old 11th February 2009, 05:14 PM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default Rocker Gaskets

Been told my rocker gaskets are leaking, have been quoted £40 by a local garage but I've never used them before, they reckon it will take about an hour. Does this sound right? Also if anyone knows where/how much parts are I might even attempt it myself using the Audipages guide! Any help/advice would be much appreciated.
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
  #2  
Old 11th February 2009, 06:15 PM
Conan_the_Librarian's Avatar
Conan_the_Librarian Conan_the_Librarian is offline
UberSeniorChiefLibrarian
 
Join Date: Jan 2009
Location: In a library
Posts: 3,865
Default

£40 sound s good for an hours labour and gaskets. But I would do it myself so I could get all oily and play with the car!
__________________
Conan (the Librarian)

Watch it if you dare

Currently,
2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block.
1997 4.2 A8SQ - the Projekt. 12 years and ongoing!
1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard
2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion.
2005 C5 Allroad 2.5TDi FE - Grey - Workhorse.
2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter.

Previously
2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex
1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure.
1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex.
2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on.
1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8.
And a list of non VAG going back 40 years before I saw the light.
Reply With Quote
  #3  
Old 11th February 2009, 06:51 PM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default

£40 was just for labour, I also had a quote of £100 but I think I will give it a go myself, going to try and source some gaskets on the weekend! Will let you know how I get along
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
  #4  
Old 11th February 2009, 07:33 PM
Ska's Avatar
Ska Ska is offline
Senior Member
 
Join Date: Jan 2009
Posts: 230
Default

DIYing will nearly always be a better quality job if you've got the knack. Garages work to time scales etc so you'll proly spend that little bit extra time to make sure no crap gets left on the cams etc.
__________________
Reply With Quote
  #5  
Old 14th February 2009, 10:31 AM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default

WOW Ska, what ever did you use to get them looking that clean?
I asked a GSF about the rocker gaskets they said they don't do them for the '8, Audi say £29 each. I am thinking of popping down this afternoon and ordering them if anyone can confirm this sounds about right prise wise?
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
  #6  
Old 14th February 2009, 04:34 PM
Ska's Avatar
Ska Ska is offline
Senior Member
 
Join Date: Jan 2009
Posts: 230
Default

I got mine for about £22 from VAGparts who I've heard are no longer in business
I used some AG machine cleaner and some gunk degreaser to clean the properly baked oil
__________________
Reply With Quote
  #7  
Old 14th February 2009, 04:55 PM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default

OOO I've got some of that AG Machine & Engine cleaner, will give it a go on its own. Went to Audi today and ordered them, they also gave me my locking nut FOC
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
  #8  
Old 19th February 2009, 08:54 AM
harpersimon
Guest
 
Posts: n/a
Default

Price sounds standard - you have a couple more cylinders to cover - I paid £25ish I think
The procedure on Audipages is sound - me and the wife did mine some time ago. Hardest bit I found was getting the gaskets to stay put to reinstall, and you may have to split a fuel line on the left-back (as you look under the bonnet) to get the cam cover off that side. Otherwise, easy peasy.
Reply With Quote
  #9  
Old 26th April 2009, 11:21 AM
AndrewGray AndrewGray is offline
Senior Member
 
Join Date: Apr 2009
Posts: 106
Default

About to do this myself.
Did you guys use gasket sealer? If so, did you use the audi stuff or just general halfords style stuff?
Reply With Quote
  #10  
Old 26th April 2009, 11:32 AM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default

I used locktite when doing another cars rocker gaskets.
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:39 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.