Fubar’d droplinks

[Johnmed]

Swapped out my droplinks. Couldn’t get through to Audi Parts dpt, so got some Lemförders for £48 from ECPs. Let’s hope they actually are Lemförder hey!

There was me thinking it would be the only simple job I’ve ever done on and Audi.... Until I realised I needed an 18mm socket and spanner. Errrr.

Found one socket. Had to settle for vice grips in place of a spanner.

Why is nothing simple!!??

[1781cc]

I fitted Gaz Gold Motorsport suspension to my TT last week, needed exactly the same thing but a deep socket - in the end Halfords only sold the 18 as part of full deep set, so £20 quid later for the Advanced pack and I finally get the bolts undone.

The rest of the world uses 17 & 19, Audi use 18, FFS

[Johnmed]

Originally Posted by 1781cc

I fitted Gaz Gold Motorsport suspension to my TT last week, needed exactly the same thing but a deep socket - in the end Halfords only sold the 18 as part of full deep set, so £20 quid later for the Advanced pack and I finally get the bolts undone.

The rest of the world uses 17 & 19, Audi use 18, FFS

Mental isn’t it!

[Dezzy]

Originally Posted by Johnmed

Mental isn’t it!

Yep, that's what happens when you have a standard, and then change it but not every one follows.
The only one I know of is BA that has a fixed relationship factor of 1.75

Metric are common ISO sizes from around 1985 mostly the same as DIN standard, but from 1992 onwards ISO/ANSI have recommendations for some head sizes to be reduced, but not everyone followed. You may find some M10 with 16mm AF instead of 17mm and as you found out an M12 with 18mm AF.

[Johnmed]

Originally Posted by Dezzy

Yep, that's what happens when you have a standard, and then change it but not every one follows.
The only one I know of is BA that has a fixed relationship factor of 1.75

Metric are common ISO sizes from around 1985 mostly the same as DIN standard, but from 1992 onwards ISO/ANSI have recommendations for some head sizes to be reduced, but not everyone followed. You may find some M10 with 16mm AF instead of 17mm and as you found out an M12 with 18mm AF.

It can be so frustrating. Joking aside, if I’d not had one old slightly suspect looking 18mm socket I’d have been back out in the wife’s car to Machine Mart.

[tc4332]

I am so lucky.
Hafraud's, Machine Mart, Screwfix, B&Q, Curry's and MacDonalds all within ten minutes walk.
Plus many others. Just feel stupid walking home with three 3metre lengths of white plastic water pipe. I don't have the use of a bus parked outside the house any more.