|
|
|||||||
| VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
4th April 2012, 01:20 PM
|
|||
|
|||
Vag-Tacho for Immob III?
Hello,
I've got Vag-Tacho and Vag-Com and know my way around them enough to be able to reprogram ECU's etc within Immob 1 and Immob 2 but this doesn't do Immob 3. Does anyone know of an alternative which can get codes from Immob 3 ECUs? I want to swap over to a Manual ECU when I carry out a conversion later on but don't want to just pay someone else to do it... Cheers MG 
|
|
#2
4th April 2012, 01:38 PM
|
|||
|
|||
|
On PF A8 you can swap ECU's with just VAGCOM(VCDS) without PIN. On FL I think you need PIN and that can be extracted with VAG Commander if I am not wrong.
As for the manual swap you can change software coding With VCDS on S8, no need for ECU swap. A bit more problematic on A8 as 4.2 A8 don't have coding for manual in ECU because they were never sold with manual.
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure
|
|
#4
4th April 2012, 02:09 PM
|
|||
|
|||
|
I can check later but you should be able to find it somewhere on the forum here as it has been discussed before.
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure
|
|
#5
4th April 2012, 03:46 PM
|
||||
|
||||
|
should be a 1 in the fourth digit in the ECU code.
Mine is 10753 for auto, manual would be 10713 http://forum.a8parts.co.uk/showthread.php?t=3478
|
|
|
|
Hybrid Mode
