Front anti-roll bar C links?

[Cornershop]

Originally Posted by David's8

First suspect would be alignment after the control arm replacement. It is recommended that full 4 wheel alignment is undertaken after such a job and including "s" measurement. See thread and stickies.

Thanks David - I thought alignment would only be needed after changing tierods/ends, which I had done before the lower control arms were flagged on the MOT. Will look into this further.

I read another thread on here about inflating tyre pressures to up to 40PSI also helped (well over the recommended 32PSI for 18" Avus) - this could suggest a wheel balance problem, although again, balancing was done when the tyres where changed before the suspension work was done.

Notorious - the term OEM is sometimes miscontrued with 'Genuine' - i'm assuming you mean Genuine, as both Lemforder and TRW are considered OEM, where OEM are companies that make parts for car manufacturers.