|
D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc. |
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
Let me know MJ if you are struggling to find your set of power steering pipes. I now have a second set that I can send on to Neil if it's easier?
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
#42
|
|||
|
|||
Buried under other stuff, not lost Now packed up and ready to head off to Spectrum tomorrow
|
#43
|
|||
|
|||
Morning MJ
Did you manage to get your power steering pipes sent off to Spectrum? I have emailed Neil for an update and he hasn't started working on them yet because he is still waiting for yours to use as a template.
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
#44
|
|||
|
|||
Well thats odd. He emailed me the other day to say mine were not recoverable but could use them as a template for yours
I have another set to send which are in better condition so I will let him know about those. |
#45
|
|||
|
|||
This may be a misunderstanding on my part. Neil said he hasn't started working on mine yet as he is waiting for "another set" from yourself. I guess he could mean he's waiting for the second set? I thought he was still taking about the first set.
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
#46
|
|||
|
|||
Ah could be. I'll try and get it sent off this week then.
|
#47
|
|||
|
|||
I now have the hoses back from Spectrum and at first glance they look really good. What do you think?
In order to try and preempt some questions you may have I sent an email to Neil with some of the more obvious one's. Hi Frank, To answer your questions. Does a potential customer defiantly have to supply usable ends?* Yes, we don’t have the tooling to copy the ends. Is there any way you can manufacture the ends if they are unusable?* No. Did you put a plastic / Teflon sleeve inside the high pressure pipe? Yes, I removed the small Nylon tubes and their fittings that secures them in place and the restrictor and refitted them all into the High Pressure hose. Did you draw a pattern or are you still relying on a sample? I make notes and do a sketch when I do this type of job but I need a donor hose for the ends so it ends up as being a pattern as well. It makes things easier if I am given a complete hose assembly to copy, when people try to dismantle them they usually end up damaging the inner Nylon tube and I don’t know the orientations of the ends which makes the job trickier. Hope these answers help Kind Regards Neil Rutter Director Spectrum Hose Ltd ------------------------------- I guess before we can call this a 100% success, someone needs to try them out.
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
#48
|
|||
|
|||
Looks good although I'm surprised they didn't re-fit the large foam tube on the pressure hose, or did they not have that from your bits and pieces? I think that is needed to stop the hose vibrating on the chassis leg.
I definitely need to get my usable hose sent off as I have a subject in the workshop which could be used for testing in the next couple of weeks. Potentially another D2-killer part solved which is excellent. All we need now is the rear bushes and water hoses and we can stick two fingers up at Audi and keep D2s going until we're not allowed petrol engines any more Last edited by MikkiJayne; 11th October 2019 at 04:25 PM. |
#49
|
|||
|
|||
Great work and good timing!!
Mine has just gone from sweating to spraying PAS fluid this week. Are you test fitting these quite soon?
__________________
2000 Audi S8 D2 4.2 V8 FL 1997 TVR Cerbera 4.2 V8 1992 Peugeot 205 Gti 1.9 |
#50
|
|||
|
|||
For some reason MJ I seem to be having problems replying to private messages. It's been like that for a while now.
Anyhow, sounds like a plan. PM me your address and I'll get them sent off. Let me know if you are in a hurry and I'll try and get them sent over night. Cheers Frank
__________________
Audi S8 D2 2002 88k mls Ebony pearl effect black. Grey interior. |
|
|