|
D3 - Engine Bay Everything under the bonnet |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Replacing both pulleys and serpentine belt on V10
Dear Folks,
Does anyone have a photo guide in how to replace the idler pulley, tensioner and serpentine belt on a 2006 S8 D3 5.2L V10? I have already checked out the workshop manuals.com site however there just doesn’t look like there’s enough room to access the components. Any added guidance would be most appreciated. Thanks, Stephen,
__________________
Present cars Daily driver: BMW e65 730d Batmobile: 2006 S8, D3, 4E 5.2L V10 BSM with (loud) Miltek SS exhaust, Carbon Fibre trim, Alcantara headlining, soft close and keyless entry. |
#2
|
||||
|
||||
Had mine replaced in situ with a load of other work and I didn't fancy having the bumper removed the bumper off for it.
My local place managed to do it but said it was very fiddly and helps if you have hobbit hands and know a lot of swear words.
__________________
Currently '8-less Previously: - Aqua Blue Pearl D3 S8 - Kamut Beige leather, ACC, B&O, factory RSE, solar sunroof, electric blinds, ski bag, Homelink, comfort headrests. - Aqua Blue D2 S8 - Grey leather/Alcantara - D3 A8 3.0 CVT - D3 3.7 V8 |
|
|