|
VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help Re coding Abs module
Hi
I fit a new Abs module on the D3 4.2 LWB The problem has been solved but it now has a massive red brake warning .. Vag com said abs unit incorrectly coded. So I followed the procedure and log in ect but it wont accept the new coding it says coding rejected can any one give me an idea why it is doing this please ? Thank you |
#2
|
|||
|
|||
I think there's a procedure somewhere out there to do an adaptation before it can be coded.
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#3
|
||||
|
||||
Could you post the sticker which is in the boot by your spare wheel with all the codes. Base on that I will do my very best to get the right code and full procedure for you ASAP considering I'm very busy today. I've done it before successfully on a 4.2TDi D3.
__________________
2006 D3 S8 5.2 V10 Ceramic Brakes, Bang&Olufsen, DTV, DAB, Rear Camera, BT, TPMS, Soft Close, Auto Boot, AMI , 4 Zone AC, Home Link, All Electric Blinds, Fingerprint, Ski Hatch, Black Extended Leather, Heated Sport Seats, Alacantra, Carbon Trim inc Aluminium Pack 2. 2015 A3 S line 1.4 TFSI - for the missus to keep her away from my car. Standard S-line equipment, no extras. 2006 D3 A8 3.7 V8 - SOLD but not forgotten |
#4
|
|||
|
|||
|
#5
|
||||
|
||||
Hi David
Just very quickly as it's mental on my end. Just to clarify You've installed a ABS module from W12?? What info you have used from W12?? Coding is a combination of brake calipers etc on the car you fitting it (info on the sticker from your current car not donor), therefore you can't use the W12 coding as this has different components installed. As far as I'm aware. Someone correct me if I'm wrong. Is a W12 module compatible with 4.2 at all?? This one I'm not sure. And to clarify, yours is 4.2 petrol ??
__________________
2006 D3 S8 5.2 V10 Ceramic Brakes, Bang&Olufsen, DTV, DAB, Rear Camera, BT, TPMS, Soft Close, Auto Boot, AMI , 4 Zone AC, Home Link, All Electric Blinds, Fingerprint, Ski Hatch, Black Extended Leather, Heated Sport Seats, Alacantra, Carbon Trim inc Aluminium Pack 2. 2015 A3 S line 1.4 TFSI - for the missus to keep her away from my car. Standard S-line equipment, no extras. 2006 D3 A8 3.7 V8 - SOLD but not forgotten |
#6
|
|||
|
|||
Hi yes the W12 module is identical to the 4.2 its the coding that is different
The log in I used for the W12 module is 06137 Long wheel base 18" 1LJ 12 cyl Auto And the new coding needs to be 0007597 and that is Long wheel base 17" 1LL 6/8CYL W/O BREMBO AUTOMATIC |
#7
|
|||
|
|||
any ideas anyone ??
|
#8
|
||||
|
||||
Hello mate
My apologies, I completely forgot. That day I did mentioned that I'm busy as hell, but yesterday I just forgot as I've had all evening to my self so I was in shock. I'm doing it as we speak. 5min
__________________
2006 D3 S8 5.2 V10 Ceramic Brakes, Bang&Olufsen, DTV, DAB, Rear Camera, BT, TPMS, Soft Close, Auto Boot, AMI , 4 Zone AC, Home Link, All Electric Blinds, Fingerprint, Ski Hatch, Black Extended Leather, Heated Sport Seats, Alacantra, Carbon Trim inc Aluminium Pack 2. 2015 A3 S line 1.4 TFSI - for the missus to keep her away from my car. Standard S-line equipment, no extras. 2006 D3 A8 3.7 V8 - SOLD but not forgotten |
#9
|
||||
|
||||
OK, this is my understanding.
(you did follow the whole procedure as per Ross-Tech clip just in case??) I wouldn't use the login for the donor car, but current car. Have you tried this login: 06297 And then coding is correct: 0007597
__________________
2006 D3 S8 5.2 V10 Ceramic Brakes, Bang&Olufsen, DTV, DAB, Rear Camera, BT, TPMS, Soft Close, Auto Boot, AMI , 4 Zone AC, Home Link, All Electric Blinds, Fingerprint, Ski Hatch, Black Extended Leather, Heated Sport Seats, Alacantra, Carbon Trim inc Aluminium Pack 2. 2015 A3 S line 1.4 TFSI - for the missus to keep her away from my car. Standard S-line equipment, no extras. 2006 D3 A8 3.7 V8 - SOLD but not forgotten |
#10
|
|||
|
|||
It would not let me log in using my current car log in ? It seems to only accept the log in of the donor car ? ....
|
|
|