A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D3 > D3 - Body and Exterior

D3 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside

Reply
 
Thread Tools Display Modes
  #1  
Old 2nd July 2019, 12:19 PM
onetwentie onetwentie is offline
Member
 
Join Date: Apr 2013
Location: Manchester
Posts: 91
Default D3 Front bumper mountings/bolt

Hi All

So in the process of removing the alternator from my 2007 D3 and need to remove one of the front bumper (driver side front wheel arch) mountings, which is attached to the front wing with a 15mm nut. One of the 3 bolts then goes through this and is secured with a 10mm nut.

The problem is, the nut mounting I mentioned won't come off, so I'm likely going to need to shear it off and replace it.

I would be grateful if someone could point me in the direction of an exploded diagram so I can start to source a spare?

thanks all in advance.
__________________
Current: 2007 Audi A8 3.0 TDI SE Quattro -
Reply With Quote
  #2  
Old 2nd July 2019, 12:26 PM
homer simpson's Avatar
homer simpson homer simpson is offline
Senior Member
 
Join Date: Nov 2013
Posts: 1,142
Default

Have a look here

https://audi.7zap.com/en/rdw/audi+a8/a8/2007-291/8/
__________________
2008 (facelift) S8 with B&O, ACC, glass sunroof, reversing camera, front and rear heated seats, ceramic brakes, homelink, electric side and rear blinds, ski load through, heated fan washer jets, remote boot closing, de-flapped manifold, fridge, umbrella holder
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:59 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.