A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Engine Bay

D2 - Engine Bay Everything under the bonnet

Reply
 
Thread Tools Display Modes
  #1  
Old 19th February 2016, 09:16 PM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default Recovering the electronics box

As with most D2s it seems, most of the screws in the electronics box in mine have seized at some point, and previous owners have just yanked the top cover off. There was only one screw left usable by the time I got it. It's 'only' £100 new for both pieces, but I'm getting bored of throwing money at this problem child so repair rather than replace. In the pics the electronics box is removed from the car (since I was also working on the heater valve) but there's no reason you couldn't do this in place.

The brass inserts are all still seized to the rusty screws and so stuck in the lid. Mole grips didn't help so I just drilled the heads off them all.







I've found some more black screws and washers on ebay - they are on the way.

To repair the box itself I found these little beasties (also on ebay):



They're called 'D nuts' and are intended for use in wood but I figured they would work just as well in plastic. The teeth on them are a particular shape to prevent them backing out, and given the torque required to put them in its unlikely you'd be able to apply more than that to an M5 screw so they'll be pretty solid.

You can see the difference to the original brass inserts here:



The new inserts are designed to fit a 7.5 - 7.9mm hole which, conveniently, is a little bigger than the one the old inserts leave when they pull out

Drill out to 7.5mm:



The new inserts have a flange on the top so the holes need countersinking slightly using a 12mm drill to allow them to sit flush. That's important to allow the lid to seal properly. Well, as best as it can anyway



The new inserts have a 5mm hex socket in the top to allow them to be screwed in:



one done:



and all complete:



Fixed for a fiver and an hour's work New screws with anti-seize grease should mean this will outlast the car.
Reply With Quote
  #2  
Old 19th February 2016, 11:43 PM
Delboy's Avatar
Delboy Delboy is offline
Senior Member
 
Join Date: Aug 2013
Location: Lowestoft, Suffolk
Posts: 2,492
Default

I am impressed by your resourceful repairs, not a duck tape and try raps type of repair either but proper robust solutions
__________________
Del

Reply With Quote
  #3  
Old 20th February 2016, 06:57 AM
The_Laird's Avatar
The_Laird The_Laird is offline
Senior Member
 
Join Date: Jun 2009
Location: Redmile: Leics, Notts, Lincs border - near Belvoir Castle
Posts: 5,069
Default

Not to put a damper on this, but I had all sorts or electrical problems recently because the rubber seal in the lid of the box had failed. A new lid comes complete with a new seal.
__________________
2002 Final Edition S8. Ebony black with Silver Grey leather and myrtle wood trim.
Current mods: solar sun roof, 20mm rear spacers, 15 mm on front, red brembo callipers, 6k headlights, rear view camera, engine remap, alloy dash dial rings, alloy navi rings, tt/phaeton pedal upgrade, (and custom matching foot rest) dension ipod interface & parrot hands free kit (both fully hidden), av input, tv in motion switched thro' PF switch in blanking plug right of steering column, Audi 'quattro' sill covers, repositioned centre console switches, radio clock, .
Planned mods: auto-dimming rear view mirror, dash cam (as steamship's), fit the ski hatch, refit philips drl's (or maybe not - nope, definitely not - horrible botch!).
Reply With Quote
  #4  
Old 20th February 2016, 10:02 AM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default

"Damper"

The rubber seal is the reason I made sure all the new inserts are flush, and luckily mine is in very good condition with no signs of water ingress even with only one screw holding it together. If that seal was showing any sign of compromise then I would definitely have replaced the lid Its about £40 so even if you only rescue the bottom piece its still a saving of £50-odd and a huge amount of swearing to get it out.
Reply With Quote
  #5  
Old 21st February 2016, 08:25 PM
Nick Jones Nick Jones is offline
Senior Member
 
Join Date: May 2015
Location: South Somerset, UK
Posts: 195
Default

I like that. Mine needs doing......

Nick
Reply With Quote
  #6  
Old 22nd February 2016, 08:39 AM
The_Laird's Avatar
The_Laird The_Laird is offline
Senior Member
 
Join Date: Jun 2009
Location: Redmile: Leics, Notts, Lincs border - near Belvoir Castle
Posts: 5,069
Default

Just in case anyone tries this and makes a mess of it, I have 2 spare lids surplus to requirements
__________________
2002 Final Edition S8. Ebony black with Silver Grey leather and myrtle wood trim.
Current mods: solar sun roof, 20mm rear spacers, 15 mm on front, red brembo callipers, 6k headlights, rear view camera, engine remap, alloy dash dial rings, alloy navi rings, tt/phaeton pedal upgrade, (and custom matching foot rest) dension ipod interface & parrot hands free kit (both fully hidden), av input, tv in motion switched thro' PF switch in blanking plug right of steering column, Audi 'quattro' sill covers, repositioned centre console switches, radio clock, .
Planned mods: auto-dimming rear view mirror, dash cam (as steamship's), fit the ski hatch, refit philips drl's (or maybe not - nope, definitely not - horrible botch!).
Reply With Quote
  #7  
Old 22nd February 2016, 08:53 PM
notorious's Avatar
notorious notorious is offline
Senior Member
 
Join Date: May 2010
Posts: 2,147
Default

Great job.
I admire the amount of effort spent to remove lower part of the box to do this repair !!!
__________________
I'd rather drive on left
Reply With Quote
  #8  
Old 24th May 2020, 09:48 PM
Ronin Ronin is offline
Banned
 
Join Date: Jul 2019
Location: Wales
Posts: 847
Default

I know this is an old thread but I just wanted to say that this really works, so thanks Mikki and keep on giving us all these cool tips!
Attached Thumbnails
Click image for larger version

Name:	98058486_272529157234787_2027316944163569664_n.jpg
Views:	280
Size:	711.8 KB
ID:	23376   Click image for larger version

Name:	98447768_266559571398928_7734986614035709952_n.jpg
Views:	295
Size:	552.4 KB
ID:	23377   Click image for larger version

Name:	99062546_567421550865560_1887131127177543680_n.jpg
Views:	248
Size:	311.4 KB
ID:	23378   Click image for larger version

Name:	98203313_2336554239980399_7959444259214458880_n.jpg
Views:	260
Size:	747.8 KB
ID:	23379  
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.