A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Axles, Brakes, Suspension and Steering

D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc.

Reply
 
Thread Tools Display Modes
  #1  
Old 13th March 2011, 05:02 PM
topcyclist topcyclist is offline
Member
 
Join Date: Mar 2011
Posts: 36
Default Refurbish Brembo's ?

Hi I have just gone through a new set of pads in a month thanks to sticking front callipers , my local dealer tells me the shims have had it and I need new callipers ......

Surely there must be someone who can refurbish these ? Anyone had any experiences , good or bad ?

Appreciate any help or thoughts on where to get a cheaper set of replacements

Thanks ,Steve
Reply With Quote
  #2  
Old 13th March 2011, 05:39 PM
Conan_the_Librarian's Avatar
Conan_the_Librarian Conan_the_Librarian is offline
UberSeniorChiefLibrarian
 
Join Date: Jan 2009
Location: In a library
Posts: 3,865
Default

If you have Brembos then there are no shims. Are these your brakes?



They may well be Teves, in which case all parts are replaceable.

Attached Thumbnails
Click image for larger version

Name:	Brembo.jpg
Views:	878
Size:	32.2 KB
ID:	1664   Click image for larger version

Name:	Teves.jpg
Views:	917
Size:	31.1 KB
ID:	1665  
__________________
Conan (the Librarian)

Watch it if you dare

Currently,
2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block.
1997 4.2 A8SQ - the Projekt. 12 years and ongoing!
1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard
2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion.
2005 C5 Allroad 2.5TDi FE - Grey - Workhorse.
2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter.

Previously
2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex
1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure.
1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex.
2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on.
1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8.
And a list of non VAG going back 40 years before I saw the light.
Reply With Quote
  #3  
Old 13th March 2011, 07:02 PM
Mr K Mr K is offline
Senior Member
 
Join Date: Dec 2009
Posts: 281
Default

Athough ive never used them, Big red come highly recommended from a lot of people. Including some nice polymer coatings, and a rage of colours (Inc black as factory).
__________________
'02 S8 - Ebony Black Pearl, 'Swing' Grey Leather/Alcantara, PDC, Xenon Plus, Bose, Phone Prep, Navigation Plus, TV, auto dipping interior and exterior mirrors, UV/Solar Tint Glass, Ski Hatch, Extended leather pack 1, Rear Sun Blinds, Memory Driver & Passenger Seat, Heated Front Screen, Heated Rear Seats.

Reply With Quote
  #4  
Old 14th March 2011, 11:36 AM
Zip's Avatar
Zip Zip is offline
Senior Member
 
Join Date: Jan 2009
Posts: 665
Default

I had new disks and pads last month. Front nearside inside pad was dragging, overheating the disk, and has warped it. It was simply because of a small amount of muck and corrosion on the pistons barrels....which is perfactly normal if your last pads had been on a long time and run particularly low. The garage who fitted them (if it wasn't you...) should have checked that the pistons were retracting fully when they fitted them.

I am having a bit of a run in with Audi about this at the moment, trying to get them to fund another new disk because it is their fault that the first one warped.

Zip
Reply With Quote
  #5  
Old 14th March 2011, 03:55 PM
mikes2 mikes2 is offline
Member
 
Join Date: Oct 2010
Posts: 73
Default

Sounds like the slider plates have lifted due to corrosion behind them.

You can remove the plates by undoing the small bolts holding them in. T27 Torx if I remember correctly. Just make sure the bolt head is clean and the tool fits correctly as you don't want to strip the head on the bolt.

Once off, the corrosion can be removed with a file.

You'll need to reshape the plates in a vice afterwards.
Reply With Quote
  #6  
Old 16th May 2011, 01:13 PM
Zip's Avatar
Zip Zip is offline
Senior Member
 
Join Date: Jan 2009
Posts: 665
Question

contacted Big Red, and they don't do the S8 Brembos.

Anyone found anyone else that will refurbish them?

Zip
Reply With Quote
  #7  
Old 16th May 2011, 01:22 PM
Zip's Avatar
Zip Zip is offline
Senior Member
 
Join Date: Jan 2009
Posts: 665
Question

Anyone use these guys? Look good.

http://www.brake-caliper-painting.co.uk/index.html

Zip
Reply With Quote
  #8  
Old 28th July 2011, 06:53 PM
SilverS8 SilverS8 is offline
Senior Member
 
Join Date: Jul 2011
Location: Norway
Posts: 362
Default

No news here?

New Brembos cost the same as complete exhaust and adjustable suspension

__________________
2003 Daytona Grey RS6
2000 Silver S8
2005 A6 1.8TQ Premium
1993 Audi S4 2.2 TQ MTM 330 (my first love!)
Reply With Quote
  #9  
Old 28th July 2011, 07:43 PM
Singh's Avatar
Singh Singh is offline
Senior Member
 
Join Date: Jan 2009
Location: Royal Leamington Spa
Posts: 3,943
Default

I sold Topcylclist a set of Brembos I was going to put on the A8 before I decided to sell it. Not sure if he got them on in the end.
__________________
2009 Audi RS 6 Saloon V10 - 420mm Ceramics, Keyless, Soft Close, Adaptive Cruise, Glass Sunroof, Blinds, Twin Pane & UV, Freeview & DAB, High Beam Assist, MTM bits, Audi Exclusive Bits, MRC, Milltek, GYEF1 ASY2's, Bluetooth streaming music to AMI mod - 753 PS/1021 NM
2016 Audi S3 Saloon, Sepang, S-Tronic - B&O, Tech Pack etc... Company Car
1995 Audi A8 4.2 V8 quattro Sport - Bose, Solar, Blinds
Reply With Quote
  #10  
Old 21st August 2011, 05:45 PM
SilverS8 SilverS8 is offline
Senior Member
 
Join Date: Jul 2011
Location: Norway
Posts: 362
Default

Bumping this one again.

There has to be somewhere we can buy new pistons and slider plates for these calipers? om my RS2 i got all those parts new from a Porsche garage..

Does anyone know IF these calipers are fitted on any other car? or the Brembo part number for these calipers? That might help us..

__________________
2003 Daytona Grey RS6
2000 Silver S8
2005 A6 1.8TQ Premium
1993 Audi S4 2.2 TQ MTM 330 (my first love!)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:06 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.