|
|
|||||||
| Daily banter For everything, and anything that doesnt fit in elsewhere |
 |
|
|
Thread Tools | Display Modes |
|
#71
22nd January 2019, 08:48 PM
|
|||
|
|||
Sounds like you two are going to be very busy with trams and new printers.
Looking forward to seeing the Hypercube build and how it pans out. Still getting used to the CR-10S so once mastered this may look at something else!!
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice  ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#72
29th January 2019, 10:09 PM
|
|||
|
|||
|
Used the free filament up the other day so ordered some new stuff.
SUNLU PLA+ (in grey). Tried it out today and the results are looking good. Although the spec says 205 to 230 degrees for the nozzle and nothing for the bed! Tried it at 220 nozzle temp and room temp for the bed - big fail. Set the bed to 60 degrees and all is good so will do some more trials and see how it goes. Question for Ray and MJ - once you have finished printing do you take the spool of filament off or leave on? Cheers
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#73
30th January 2019, 12:03 AM
|
||||
|
||||
|
I leave it on.
Unless the next print needs a different filament.
__________________
Ray at Wigan Pier 2014 A8L D4 4.0TFSI Gold (Sticker says "Beige") Can't leave you in a black smoke cloud anymore.. In progress, Nothing left to do.  Gone 2004 A8 D3 3.0 TDI. Ebony Pearl Black (with little bits of other colours and glitter)
|
|
#74
30th January 2019, 07:16 AM
|
|||
|
|||
|
Thanks Ray.
Just that my printer is in the kitchen that can get quite damp so was wondering about the filament wicking the moisture and thereby affecting how it prints.
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#75
30th January 2019, 09:17 AM
|
||||
|
||||
|
I see your point Andy.
Mine is on the dining room table, and I don't have to keep clearing it anymore.
__________________
Ray at Wigan Pier 2014 A8L D4 4.0TFSI Gold (Sticker says "Beige") Can't leave you in a black smoke cloud anymore.. In progress, Nothing left to do. Gone 2004 A8 D3 3.0 TDI. Ebony Pearl Black (with little bits of other colours and glitter)
|
|
#76
30th January 2019, 11:40 AM
|
|||
|
|||
|
Mine was in the kitchen and I put the spool away after every print unless it was going to do another one immediately. Now I've moved it to the spare room with 38% humidity so it depends what filament is on. If its something expensive or fancy it goes in the drybox straight away. If its cheap prototyping PLA it stays out until I need to change it.
|
|
#77
30th January 2019, 12:27 PM
|
|||
|
|||
|
Thanks.
For now I will remove it once finished printing as Iam not sure how much keeping it out affected the prints!
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#78
4th February 2019, 04:55 PM
|
||||
|
||||
|
Super-fast 3D printer/replicator anyone?
https://www.sciencealert.com/scienti...ast-3d-printer https://www.youtube.com/watch?v=t5UsRDS-wqI
__________________
Mark ------------------------------------------------------ 2002 FE S8 Ebony Black Pearl ------------------------------------------------------  ------------------------------------------------------ Cars Owned: The Tesla Era: 2020 Model S Performance Ludicrous+ (present) (Black, with all black premium interior and carbon fibre décor, 21" sonic carbon twin turbine wheels and FSD capability) The Audi Era: '97 A8 4.2 (Ming Blue) --> '96 A8 4.2 QS (Dark Green) --> '02 FE S8 (present) The Citroen Era: '84 BX 1.6 RS --> '89 BX 1.9 DTR Turbo --> '94 XM 2.0L Turbo --> '96 XM 2.0L Turbo Exclusive --> '00 Xantia Activa 2.0L Turbo The Banger Era: '76 1.2L Lada VAZ-2101 (Ruski Fiat 124) --> '80 1.7L Morris Ital HL, finished in Ermine White and Rust Last edited by moltuae; 4th February 2019 at 04:57 PM.
|
|
#79
6th February 2019, 06:02 PM
|
|||
|
|||
|
I saw this but currently limited by cost (main limit...) and the size of the item you can make but does look interesting and promising
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#80
7th February 2019, 06:28 PM
|
|||
|
|||
|
Printed this for the wife at the weekend as she is a fan of Keanu Reeves.
It's from the John Wick movies. This is how it looked after being printed:  Shine light through it and you get this: 
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
|
|
Linear Mode
