|
|
|||||||
| D3 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc |
 |
|
|
Thread Tools | Display Modes |
|
#21
15th January 2016, 12:44 PM
|
|||
|
|||
Options are listed in the build sticker.
See IT's post here http://forum.a8parts.co.uk/showthread.php?p=57 Also, registering your car with Audi.co.uk will also give the options.  Edit, Or do you need an option decode? http://vag-codes.info/
__________________
Matt 2004 A8 3.7q, 1998 A4 2.8q, 1994 Coupe 2.8q SORN, Last edited by mattylondon; 15th January 2016 at 12:49 PM. 
|
|
#22
15th July 2016, 01:08 PM
|
||||
|
||||
|
Hi all,
Yes, I'm at it again... resurrecting old threads! Coming in to work today and I noticed the rear screen was misted over. I turned on the heated screen and it had no effect. It stayed on for around 10mins but still, no visible effect on the screen. Now, it was quite warm this morning (maybe 11 degrees?). Do you think the electronics have told the system the heating isn't needed? Or am I about to lose another few thousand replacing the rear screen? Mine is heat reflective, so has the really fine elements that are almost invisible.
|
|
#23
15th July 2016, 01:39 PM
|
||||
|
||||
|
I should have added - VCDS showed nothing in the scan.
|
|
|
|
Linear Mode
