A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Axles, Brakes, Suspension and Steering

D2 - Axles, Brakes, Suspension and Steering Brakes, Springs, shocks, steering racks, steering columns, suspension arms, wheel hubs etc.

Reply
 
Thread Tools Display Modes
  #1  
Old 28th August 2018, 10:39 AM
quattrofrank quattrofrank is offline
Junior Member
 
Join Date: Aug 2018
Posts: 18
Default Suspension parts, help to find correct part

Hi

I`m trying to source the correct upper control arms, but every place I look there seem to be multiple parts that supposedly fits even with different part numbers.
Have checked the parts catalouge as well but there seem to be a lot of different parts where only the last letter is different.
My chassi number ends with: VN006346
In the parts catalouge I see that there is a difference with chassi number series s and v, I guess this is the sports package. Is there any difference in the control arms themself?

Any guidance to what fits would be helpful.
Reply With Quote
  #2  
Old 28th August 2018, 11:28 AM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default

The difference in the upper rear arms is a small rubber buffer on top of the balljoint. Early cars had a rubber block screwed to the top of the suspension turret whereas later ones had the buffer built in to the top of the arm. Based on your chassis number you should have the later ones.

If they're both like the left one in this pic they're the early ones. If the rear one is like the right one in this pic then they're the later ones.



The upper front arms are common to all from S-002701.

Both are the same between sport and comfort, otherwise you would see PR codes listed along with the various different arms.

I would say numbers are as follows:

Upper front - 4D0 407 505H
Upper rear left - 4D0 407 509J
Upper rear right - 4D0 407 510J

Meyle HD equivalents

Upper front - 116 050 8239/HD
Upper rear left - 116 050 8292/HD
Upper rear right - 116 050 8293/HD

Attached Thumbnails
Click image for larger version

Name:	upperarms.jpg
Views:	502
Size:	98.1 KB
ID:	20030  

Last edited by MikkiJayne; 28th August 2018 at 11:31 AM.
Reply With Quote
  #3  
Old 28th August 2018, 01:47 PM
quattrofrank quattrofrank is offline
Junior Member
 
Join Date: Aug 2018
Posts: 18
Default

Thank you I checked and I have the later ones. Now I just need to find a supplier for theese. I reckon meyle hd is the recomended one over the others?
Reply With Quote
  #4  
Old 28th August 2018, 02:10 PM
quattrofrank quattrofrank is offline
Junior Member
 
Join Date: Aug 2018
Posts: 18
Default

Also I realised that there is a complete kit, probably best to just buy that and do everything at once.
When checking I see that there are two different kit but both is listed to fit my 97 3.7quattro.
116 050 0030/HD and 116 050 0041/HD
Which do I buy? And also is Ebay the place to get this? Cannot find any local supplier (located in Norway) so need to shop internationally
Reply With Quote
  #5  
Old 28th August 2018, 02:14 PM
MikkiJayne MikkiJayne is offline
Senior Member
 
Join Date: Jan 2012
Posts: 5,017
Default

Order of preference and decreasing cost is TRW / Lemforder (OEM), then Meyle HD, then other name brands such as Delphi, QH, etc. Avoid the unbranded Chinese tat.

TRW / Lemforder are 'best' if you want to spend the money, but Meyle HD come with a 4 year warranty and they seem very well made for the price. A few of us are running them and they're doing well so far after a couple of years.

Murray's Direct are quite a good supplier of Meyle, but there are a number of different suppliers on ebay with competitive prices.

116 050 0030/HD is the correct kit (up to 4D-X-005 500). 0041 is for 4D-X-005 501 onwards. The bottom balljoint pins are different sizes on the two kits.

Edit - our sponsors may be able to get the kit for you and I'm sure they can post to Norway. If not, PM me and I can help

Last edited by MikkiJayne; 28th August 2018 at 02:26 PM.
Reply With Quote
  #6  
Old 29th August 2018, 11:09 AM
quattrofrank quattrofrank is offline
Junior Member
 
Join Date: Aug 2018
Posts: 18
Default

Thank you for your help. I sent them an email so lets hope they have a good price and will ship internationally.
If not I see several sellers on ebay
Reply With Quote
  #7  
Old 9th November 2018, 02:21 PM
runman99 runman99 is offline
Junior Member
 
Join Date: May 2013
Posts: 5
Default A8 4.2 D2 PF Sport - Replacement Springs / Shocks..

(Nov 2018 MOT time & cracked spring crisis ! )

Any help in finding suitable replacement suspension springs for the front of my 1999 D2 A8 4.2 Sport would be very appreciated.
Have so far found out that the Front Springs Should Be:-
4D0 411 105 AN
or
4D0 411 105 DF
Two Silver Paint Marks.

Shocks :-
4D0 413 031 AE
red Paint Mark
or
4D0 413 031 BN
Yellow Paint Mark

All very well but Audi do not have the springs any more??
Please email me any places that may be able to help guys?

Cheers
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.