|
D3 - Everything Else Anything that doesnt fit elsewhere |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What have I Fried??
Hi all,
Well the new amplifier arrived today, I plugged it in to test it before fitting and it was working well, so I set about installing it. During the installation I had a battery charger on keeping the battery topped up whilst the doors were open. As I was bolting the divider/mounting plate back into position I inadvertently let the metal ratchet handle touch the live wire coming into the fuse box, this created a short between the fuse box live and the car bodywork (see attached photo). There were sparks and scorching on the bolt that the ratchet was attached to. I finished bolting everything up and turned on the ignition and the MMI has stopped working and I have gained a 'parking brake malfunction' on the DIS display. I ran a VCDS scan and got the following faults for the parking brake, I have cleared them but they come straight back: Tuesday,18,July,2017,15:56:03:32225 VCDS Version: Release 17.1.3 (x64) Running on Windows 10 x64 www.Ross-Tech.com Address 53: Parking Brake Labels: 4E0-910-801.clb Control Module Part Number: 4E0 910 801 A HW: 4E0 907 801 Component and/or Version: EPB AV1C1010 H01 1010 Software Coding: 0000221 Work Shop Code: WSC 00443 210 90890 VCID: 1D64D0C261B610FF26F-8048 3 Faults Found: 00576 - Terminal 15 012 - Electrical Fault in Circuit - MIL ON Freeze Frame: Fault Status: 11101100 Fault Priority: 4 Fault Frequency: 1 Reset counter: 141 Mileage: 239112 km Time Indication: 0 Date: 2017.07.18 Time: 15:50:06 Freeze Frame: Voltage: 11.70 V Count: 41 02434 - Supply Voltage for Control Module for Left Channel 009 - Open or Short to Ground - MIL ON Freeze Frame: Fault Status: 11111001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 141 Time Indication: 0 Freeze Frame: Voltage: 12.21 V Count: 112 02435 - Supply Voltage for Control Module for Right Channel 009 - Open or Short to Ground - MIL ON Freeze Frame: Fault Status: 11111001 Fault Priority: 2 Fault Frequency: 1 Reset counter: 141 Time Indication: 0 Freeze Frame: Voltage: 12.32 V Count: 113 VCDS can't make contact with any of the MMI system components. I have checked all the fuses but they all seem good. Any ideas chaps? Thanks Dave Last edited by davekes; 18th July 2017 at 03:41 PM. |
|
|