A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D3 > D3 - Sat Nav, ICE, Audio & TV

D3 - Sat Nav, ICE, Audio & TV All in car entertainment discussions

Reply
 
Thread Tools Display Modes
  #1  
Old 30th October 2019, 01:07 PM
irelandbuyer irelandbuyer is offline
Senior Member
 
Join Date: Aug 2015
Posts: 116
Default Reverse Camera - Fault 02283

Hi lads,

A few weeks ago my reverse camera stopped working. The sensors are fine and it shows the parking graphics, just not the camera itself.

I checked and it's throwing up code 02283. I googled it and on Ross Wiki it says: "02283 - Video Connection to Output [End Unit] "

As it happens, i changed last week the boot lid handle (corroded number plate lights) and we checked that perhaps the wiring was pinched somewhere in the boot, which it isn't. I'm thinking that perhaps a cable has come loose where it connects into the module. But i'm not sure the location or which box it is.

Would anyone have any advice on that?

Many thanks...


ALAN
__________________
2007 Audi A8 D3 3.2 FSI
Reply With Quote
  #2  
Old 30th October 2019, 05:08 PM
snapdragon snapdragon is offline
Senior Member
 
Join Date: Nov 2011
Posts: 1,669
Default

When you open the boot it is behind the trim on the left far into the boot near the back seat. You have to remove the boot floor and the left trim panel.
If you have a TV, the TV video passes through the RVC module on it's way to the MMI, does the TV work?

Last edited by snapdragon; 30th October 2019 at 05:10 PM.
Reply With Quote
  #3  
Old 30th October 2019, 06:53 PM
irelandbuyer irelandbuyer is offline
Senior Member
 
Join Date: Aug 2015
Posts: 116
Default

Thanks Snap.

The TV is on analogue so hasn't worked since the changeover...

I'll have a look tomorrow. I'm hoping that it's just a cable that's dropped out.....you take the camera for granted really, until it's gone....
__________________
2007 Audi A8 D3 3.2 FSI
Reply With Quote
  #4  
Old 30th October 2019, 07:22 PM
homer simpson's Avatar
homer simpson homer simpson is offline
Senior Member
 
Join Date: Nov 2013
Posts: 1,142
Default

Video Connection to Output to em would mean the connection to the camera. Have you tried disconnecting it and checking the connector/pins?
__________________
2008 (facelift) S8 with B&O, ACC, glass sunroof, reversing camera, front and rear heated seats, ceramic brakes, homelink, electric side and rear blinds, ski load through, heated fan washer jets, remote boot closing, de-flapped manifold, fridge, umbrella holder
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:37 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.