|
|
|||||||
| D3 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
 |
|
|
Thread Tools | Display Modes |
|
#11
17th April 2014, 08:22 AM
|
|||
|
|||
Looks great.
Did you remove any of the rubber ribber seals? I had a look at my car after seeing your first post and from what I can remember I thought the rubber trim along the bottom actually went on top of the metal plate? Did you just cover everything and paint whatever you could of the plate? Rather than every last mm of it? 
|
|
#12
17th April 2014, 08:47 AM
|
|||
|
|||
|
Cheers.
The rubber near the glass can be pulled back if you wind the window down. Around the other 2 sides it can be moved but not easily so I just masked it as best bit I would say that 95% of the metal was on show - 5% was below the seal so not accessible but looked to be in good nick so all good. Good luck if you do do it 
__________________
Andy. Current cars: BMW i4 M-Sport Peugeot 207 (the sons) Triumph Daytona 675 (2017 reg) =========================== Gone but not forgotten Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023) 1972 T2 Bay Window Camper (Slow) Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre 2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member) 2000 A8 FL QS 4.2 (with RNS-E - Nice  ) (Engine poorly so sold on to be brought back by someone who has the time)
|
|
#14
7th April 2015, 07:02 PM
|
||||
|
||||
|
Sorry to necro an old thread, but I have the exact same thing happening on my car. Very annoying! Anyway, I was thinking about seeing if the panels could be vinyl wrapped, as an alternative to painting. Any thoughts?
__________________
Rob -- 2013 Audi A7 BiTDi, with Tech Pack High. 2007 Audi S8, with Rear Seat Entertainment, Quad Zone Climate, DAB/DVB and electric blinds. ** sold **
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
