|
|
|||||||
| D3 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc |
 |
|
|
Thread Tools | Display Modes |
|
#1
30th December 2015, 10:51 PM
|
|||
|
|||
Replacing Front Inner PDC
Do I need to remove the front bumper to replace the front driver's side inner PDC (the one that fits in the number plate surround)? Or can it be accessed another way?
__________________
Lee 2017 Nissan Leaf Tekna 
|
|
#2
31st December 2015, 07:42 AM
|
|||
|
|||
|
you dont have to remove it , just loosen it enough to get your hand in, still requires removal of inner wheel arch, undo the bolts in there enough to pull the bumper forward a little.
__________________
 ______________________________________________A8 4.2TDI - Ice Silver, Comfort heated/cooled/massage Seats, Alcantara, Extended Leather pack, Ambient light pack, Solar roof, Night Vision, Lane change assist, Audi presense, Audi BrakeGuard, ACC Cruise, Blinds, Quad Air, AMI, Online services, Parking with rear Camera, Aluminium brushed inlays, Adaptive Zenons, High beam assist, Bose Sound, and more Gone but not forgotten: A8 D3 2005- AMI HDD, Audible Parking, TV, NAV, Bluetooth, Hybrid TV, Aftermarket headrest monitors, Rosstech VCDS / Vagcom
|
|
#4
1st January 2016, 02:32 PM
|
|||
|
|||
|
vagcom tells you which one is faulty
__________________
______________________________________________A8 4.2TDI - Ice Silver, Comfort heated/cooled/massage Seats, Alcantara, Extended Leather pack, Ambient light pack, Solar roof, Night Vision, Lane change assist, Audi presense, Audi BrakeGuard, ACC Cruise, Blinds, Quad Air, AMI, Online services, Parking with rear Camera, Aluminium brushed inlays, Adaptive Zenons, High beam assist, Bose Sound, and more Gone but not forgotten: A8 D3 2005- AMI HDD, Audible Parking, TV, NAV, Bluetooth, Hybrid TV, Aftermarket headrest monitors, Rosstech VCDS / Vagcom
|
|
#5
1st January 2016, 10:06 PM
|
||||
|
||||
|
Quote:
__________________
 Audi D3 S8 - 2007 - V10. B&O, Phantom Black, black and silver interior, and still completely standard with everything working as it should  Audi TT - 2015 - Ultra
|
|
#7
5th January 2016, 09:09 AM
|
|||
|
|||
|
Update. Still no fault codes showing on VCDS, so found the measuring block in 001 for rear sensors. The inside rights sensors nearly always shows 0cm, but so times it will work and show 255cm and change as I reverse closer to something.
Will this be a wiring issue, or just a replacement sensor? Taking the bumper off sometime soon to have the exhaust tips painted and a dent removed so would be handy to have a replacement sensor then
|
|
|
|
Linear Mode
