|
|
|||||||
| D2 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside |
 |
|
|
Thread Tools | Display Modes |
|
#1
3rd February 2013, 12:40 PM
|
||||
|
||||
MOD: Plastic caps for wing bolts
If you want to cover wing bolts under your bonnet you can do so with black plastic caps part number 'N 036 321 2' -- they cost pennies.
You may need to do so for the following reasons: * you want to have a bit more sophisticated look. * your wing bolts are rusty. * you changed those bolts for brand new ones and they are unpainted. * you had to loosen those bolts and then tighten them again to adjust wing position for a finer gap between bonnet and the wing (yes, wing is adjustable). This may damage paint on those bolts. Two pictures:
__________________
I'd rather drive on left Last edited by notorious; 3rd February 2013 at 02:03 PM. 
|
|
#2
3rd February 2013, 01:42 PM
|
||||
|
||||
|
Nice - need to do this on my boot hinge bolts as they're a bit rusty from previous adjustment
__________________
===SOLD===2002 Audi S8 D2 Final Edition (yes, really) in Avus Silver with purple extended leather===SOLD=== 2011 S5 Sportback in Phantom Black with black Super Sports leather, 9x20s, tech pack high, adaptive xenon plus, intelligent key, memory seats pack, sunroof, B&O, Audi Drive Select & quattro Sports Diff, DAB, parking system plus 2015 VW Golf GTI Performance Pack in Carbon Grey with black Vienna leather, tech pack (Discovery Pro nav & Dynaudio), DCC, factory towbar and retrofit RVC
|
|
#4
14th October 2016, 02:08 PM
|
||||
|
||||
|
Update:
Those caps appeared to be cracking after a couple of years under bonnet, so I changed them to more advanced ones, that cover washers as well. They are made of softer plastic too. Part number N 910 706 01 and you'll need 12.
__________________
I'd rather drive on left
|
|
#5
14th October 2016, 09:20 PM
|
|||
|
|||
|
Good find
|
|
|
|
Linear Mode
