Number plate fixings
My (embossed metal) number plates are both secured by the double-sided sticky foam pads, which I’m not too fond of!
The front number plate, because its curved, frequently pops off at one end or the other, and I had cause to remove one end of the rear one recently (to get at the little hole that I drilled for emergency boot opening), which put a slight bend in the number plate, and it now refuses to stick back (even with a new sticky pad).
The pre-drilled (and tapped) holes at the rear are too large for the yellow and black plastic bolts that I got from Halford’s and I’m not sure if there are holes for the front plate.
Has anyone found a good solution - you must have done!
__________________
2002 Final Edition S8. Ebony black with Silver Grey leather and myrtle wood trim. Current mods: solar sun roof, 20mm rear spacers, 15 mm on front, red brembo callipers, 6k headlights, rear view camera, engine remap, alloy dash dial rings, alloy navi rings, tt/phaeton pedal upgrade, (and custom matching foot rest) dension ipod interface & parrot hands free kit (both fully hidden), av input, tv in motion switched thro' PF switch in blanking plug right of steering column, Audi 'quattro' sill covers, repositioned centre console switches, radio clock, .
Planned mods: auto-dimming rear view mirror, dash cam (as steamship's), fit the ski hatch, refit philips drl's (or maybe not - nope, definitely not - horrible botch!).
|
7th May 2020, 11:44 AM
Threaded Mode