|
D3 - Interior Trims Seats, dashboards, plastics, everything inside the cabin |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Retrofit Ski hatch?
Has anyone retorfitted a Ski Hatch? I miss the ability to carry the odd length of timber/copper, so was wondering if anyone had done this and if there are any gotchas?
cheers
__________________
2004 A8 3.0 TDI Sport Brilliant Black Came with: Black Valcona/Alcantara Leather, KESSY, rear blind, flappy paddle gear change, Phone Prep, TV Added:Bluetooth, AMI, Hybrid TV, Parking plus, Ski hatch, towbar, DAB, Umbrella Holder, Reversing camera, Auto lights, Wheel refurb Things to fix: Turbo fault, power drain |
#2
|
|||
|
|||
Can be done, but it needs the hole cut in the panel behind the seats.
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. Last edited by PsYcHe; 10th May 2012 at 10:24 PM. |
#3
|
||||
|
||||
The hole is already in the panel behindthe seats as i have used that to get into the boot.
Is this all i would need? http://www.ebay.co.uk/itm/3804039692...ht_2999wt_1026
__________________
2004 A8 3.0 TDI Sport Brilliant Black Came with: Black Valcona/Alcantara Leather, KESSY, rear blind, flappy paddle gear change, Phone Prep, TV Added:Bluetooth, AMI, Hybrid TV, Parking plus, Ski hatch, towbar, DAB, Umbrella Holder, Reversing camera, Auto lights, Wheel refurb Things to fix: Turbo fault, power drain |
#4
|
|||
|
|||
Maybe... Not sure if the seat back needs changed or not... never looked into it in a D3.
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#5
|
||||
|
||||
Very simple retrofit
Just to follow up on my own question, it is a pretty easy retrofit.
All that is needed is to remove the cover trim from behind the armrest - it just pulls out from under the seat back. Pull out the soundproofing, which is already cut and reveal the hole in the bulkhead filled with a plastic filler. You can wiggle the plastic out through the front once it has been unclipped. Then carefully cut the carpet covering the rear bulkhead using the hole as a cutting guide and push the hatch in from the boot. It just clips in just like the plastic cover that you have just removed. Most of the used ski hatches i saw did not seem to include the trim piece that covered the front edge between the hatch and he seats, so will need to be ordered separately at huge cost if not supplied- this is the only real gothcha. All in it probably took about 45 minutes from start to finish and well worth doing.
__________________
2004 A8 3.0 TDI Sport Brilliant Black Came with: Black Valcona/Alcantara Leather, KESSY, rear blind, flappy paddle gear change, Phone Prep, TV Added:Bluetooth, AMI, Hybrid TV, Parking plus, Ski hatch, towbar, DAB, Umbrella Holder, Reversing camera, Auto lights, Wheel refurb Things to fix: Turbo fault, power drain |
#6
|
||||
|
||||
I'm retrofitting ski hatch now and there's one thing I don't understand. The hatch has a magnet from the boot side. I understand the magnet is designed to hold hatch in place when opened. But magnet doesn't work with aluminium... When hatch opens the magnet is at awkward angle to chassis so it can't engage with anything.
What that magnet is for? Also got a part called "stop plate cover" that came with the hatch: I don't understand where should I use that "stop plate cover". Because it is made of metal I make conclusion it should work with a magnet Confused a bit.
__________________
I'd rather drive on left |
#7
|
|||
|
|||
Is there not a frame that goes with the ski hatch that would match up with the lugs on the metal bar you have?
__________________
2010 Jag XF 3.0D Portfolio S I know.. I know.. |
#8
|
|||
|
|||
If you take a look directly upwards from the base of the ski hatch opening in the boot (the underside of the parcel shelf in effect) there is a couple of slits in the metal where the gold piece of steel will slot into (apply a little pressure to bend it slightly so it will snap into position)
This will then line up with the magnet so that when the hatch is in use it keeps the cover up and out of the way. Hope this helps :-)
__________________
At Work to Break: 2001 TT 8N 1.8T Quattro with a loud exhaust! 2000 A8 D2 3.7Q Non Sport Ming Blue 1999 A8 D2 4.2Q Non Sport Santorin Blue 2002 A6 C5 Allroad 2.5 TDi Silver with Black Leather 2001 A2 1.4 TDi 2006 A6 C6 2.4 Quattro Avant Canyon Red At Work to Drive: 1997 S8 Pearl White Solar Roof, Electric Heated Rear Seats, Blinds, Bose, Cruise, Headlamp Wash, Ski Hatch 1998 Audi Cabriolet 2.6, Air Con, Electric Roof, Leather, Hard Top, Headlight Wash 2008 Fiesta Sportvan x2 2002 Transit 2.4 LWB 2007 VW Crafter Recovery Truck 2013 VW Caddy Highline, DAB, Heated Seats, Touch Screen Stereo, Headlamp Wash and Webasto with Telestart 2010 RS6 Daytona Grey, Twin Pane, Sunroof, Adaptive Cruise, Soft Close and some extra horses. At Work to Hire: 4x 6 Berth Sunlight Motorhomes |
#9
|
||||
|
||||
No Perhaps maybe because I've got FL and the metal bar is for the pre-FL...
__________________
I'd rather drive on left Last edited by notorious; 31st May 2013 at 09:41 AM. |
#10
|
||||
|
||||
Quote:
__________________
I'd rather drive on left |
Thread Tools | |
Display Modes | |
|
|