|
|
|||||||
| D2 - Interior Electrics Airbags, Sensors, climate modules, instrument clusters, switches etc |
 |
|
|
Thread Tools | Display Modes |
|
#1
19th April 2011, 01:10 PM
|
|||
|
|||
where to buy this little connector
Would anyone know where I could buy this little sucker......
went to tps today....and supposedly you cant get it on its own....only with a bit of wire as well.... Thanks for your help.... 
|
|
#2
19th April 2011, 01:17 PM
|
||||
|
||||
|
where about is it from Ranj?
__________________
Conan (the Librarian) Watch it if you dare Currently, 2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block. 1997 4.2 A8SQ - the Projekt. 12 years and ongoing! 1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard 2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion. 2005 C5 Allroad 2.5TDi FE - Grey - Workhorse. 2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter. Previously 2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex 1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure. 1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex. 2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on. 1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8. And a list of non VAG going back 40 years before I saw the light. 
|
|
#3
19th April 2011, 04:54 PM
|
|||
|
|||
|
Little connector
It's one of 4 metal connectors that goes into the grey plug that connects on to the back of the blinds switch....the part number of the grey plug is 993971972.
Thanks for your help...
|
|
#4
19th April 2011, 05:07 PM
|
||||
|
||||
|
Don't recognise the connector type. I thought all the sockets that plug onto the switches had tagged spade connectors in. Will root around at the weekend and see if I can find some more info.
__________________
Conan (the Librarian) Watch it if you dare Currently, 2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block. 1997 4.2 A8SQ - the Projekt. 12 years and ongoing! 1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard 2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion. 2005 C5 Allroad 2.5TDi FE - Grey - Workhorse. 2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter. Previously 2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex 1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure. 1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex. 2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on. 1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8. And a list of non VAG going back 40 years before I saw the light.
|
|
#5
19th April 2011, 08:23 PM
|
|||
|
|||
|
Try a local auto-electrician; they should stock most connectors. Trouble with those is they are hard to get hold of, and are supplied in large quantities. We used to use these in my old firm... I'm just trying to think of the manufacturer name... AMP/ Tyco rings a bell for some reason...
__________________
  Yeah baby!!2002 Aqua Blue S8 with Milltek - Now sold  SL55 AMG Silver with designo red leather and 20" Carlsson 1/16 Utlralight Wheels
|
|
#6
19th April 2011, 08:43 PM
|
||||
|
||||
|
you could buy one from a8-parts
__________________
Audi S8 Phantom Black
|
|
#7
20th April 2011, 12:24 PM
|
|||
|
|||
|
Where to buy this little...
A tagged spade connector will probably do the same job to be honest...I will try it tonite to see if they will fit into the plactic connector....
I decided to order the connector with wire from Tps for now...they actually cost 3.50 each...which is a bit pricey I thought...but not much choice...I will look up those manufacturers cos it would be good to source those connectors for similar jobs... Thanks for the suggestions guys...
|
|
|
|
Linear Mode
