Has anyone fitted RNS-E?

[The_Laird]

Oh, bloody hell! That is just too scary! My '8 is an every day car, so that would keep it out of use far too long. I'll get in touch with Shark_90. Wher's he based and did you have to supply the head unit?

[rutgerf]

Just bought meself a Rns-e also to replace the rns-d

Now i am a bit confused about what adapter cable i need to have
Can someone tell me witch adaper cables i need to order from kufatec??
The direct link Ian post earlier doesnt seem to work.

Its for a s8 2000 with bose sound

Thanks

[sutherland]

Originally Posted by Ian@A8Parts

Physically, neither the A6 nor the A4 unit will fit perfecty. The A6 will be slightyl too wide, and the A4 one is slightly too narrow (mm or so, barely noticable) and too tall, but can be shaved down.

Anyone know where I can see a photo of an A4 unit in an A8? I'd like to see how noticeable or not the mm gap is.

[rutgerf]

Originally Posted by sutherland

Anyone know where I can see a photo of an A4 unit in an A8? I'd like to see how noticeable or not the mm gap is.

Here ya go

[IT]

Originally Posted by rutgerf

Just bought meself a Rns-e also to replace the rns-d

Now i am a bit confused about what adapter cable i need to have
Can someone tell me witch adaper cables i need to order from kufatec??
The direct link Ian post earlier doesnt seem to work.

Its for a s8 2000 with bose sound

Thanks

Try this:

http://www.kufatec.de/shop/product_i...udi-A6-4B.html

And if it doesnt work, just follow the A6-4B chassis and go through unil you find and RNS-E retrofit cable. the A6 (pre 2005) and A8 are identical as far as wiring is concerned in this case, so just fill in the questions and say you have an RNS-D.

Product number 33405.

Also note you will need aerial adapters for converting the RNS-D radio and naviation aerials to the RNS-E connectors.

Hope that helps.

I'm seriously contemplating putting an RNS-E in my D2 at the moment, so I might (famous last words) do an end to end write up....