|
D2 - Fuel and Exhausts Everything to do with getting fuel into the engine, and fumes back out again |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Thanks MJ. I was going round in circles trying to source specific components.
__________________
Paul Gosport UK ________________________ Audi S8 2002 FE Avus Silver / Extended Red Leather. Daily Driver: BMW 3 series GT - Just more practical for my camping trips! |
#12
|
|||
|
|||
Quote:
Now it leads me on to another question. On fitting the new cat/downpipe I have noticed there is only approx 10mm clearance between the pipe and the epdm cover of the gearbox support mount, as picture. I checked with the original and there was a bit more - approx 15mm clearance. I am concerned there is not enought clearance between the downpipe and the gearbox support mount with regard to heat dissipation affecting it. Any advice? Update to this: Transpired the first downpipe that I thought was from BM catalysts (bought through a third party) had been modified - bent out of the original shape - so I was on to a loser from the start. Purchase of another 'original unmolested' resulted in enough clearance. No further issue.
__________________
Paul Gosport UK ________________________ Audi S8 2002 FE Avus Silver / Extended Red Leather. Daily Driver: BMW 3 series GT - Just more practical for my camping trips! Last edited by strummagnet; 4th April 2022 at 11:40 AM. Reason: Issue resolved |
|
|