|
|
|||||||
| VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods. |
 |
|
|
Thread Tools | Display Modes |
|
#1
9th June 2012, 02:06 PM
|
|||
|
|||
Code D2 central locking for alarm beep
Right, so have VCDS which I currently only use to scan and fix errors on my A8.
I would like to program the central locking to beep when the car is locked / unlocked in addition to the currently flashing indicators. The current controller coding is: 13130 , so could someone advise what needs to be added to enable the lock / unlock beep. With my previous car altering settings was easy, as it had full Canbus and you could use the long code helper, but seemingly not with the A8. Address 35: Centr. Locks Labels: 8D0-862-257.lbl Part No: 8L0 862 257 P Component: CV-Pump, Alarm, RC D17 Coding: 13130 Shop #: WSC 00000 VCID: 428F4E3B641F
__________________
Manny 2004 A4 1.8T Sport Cabriolet, 89K Miles Past 2004 D3 A8 3.7 Quattro, Xenon, Bose, Blinds, Solar Sunroof, TV, ACC, phone and almost every option. 168K miles rising slowly with retrofit AMI and DVB-T in place of Analogue 2003 Volvo S60 D5 SE Manual, 197K miles. 2001 D2 A8 3.7 QS, Bi-Xenon, Bose, Blinds, Electric Everything, retrofitted RNS-D, 191K Miles 
|
|
|
|
Linear Mode
