Wanted, A8 PF wiring loom parts

[SyncroS8]

I'm looking at doing another install but this time with a PF A8 D2 engine and need the following parts.

Ignition key (x2)
Immobiliser transponder ring
Wiring from the Immobiliser ECU to the Immobiliser transponder ring
Wiring plug from the engine ECU to the car. There is only one connector from the engine ECU which goes into the car.

I've already bought the Immobiliser ECU from A8 parts so have that and can code that to the new key and engine ECU.

I have asked A8 parts for these but the days of having spare hacked about wiring looms have gone for the D2 PF and understandably, they are reluctant to chop the few looms that they have left over.

Is anyone breaking an old PF A8 4.2?

syncros8@gmail.com

07989 333437

MG

[Delboy]

Originally Posted by SyncroS8

I'm looking at doing another install but this time with a PF A8 D2 engine and need the following parts.

Ignition key (x2)
Immobiliser transponder ring
Wiring from the Immobiliser ECU to the Immobiliser transponder ring
Wiring plug from the engine ECU to the car. There is only one connector from the engine ECU which goes into the car.

I've already bought the Immobiliser ECU from A8 parts so have that and can code that to the new key and engine ECU.

I have asked A8 parts for these but the days of having spare hacked about wiring looms have gone for the D2 PF and understandably, they are reluctant to chop the few looms that they have left over.



Is anyone breaking an old PF A8 4.2?

syncros8@gmail.com

07989 333437

MG

What you trying to achieve, the immo can be disabled in ecu's so you would not need all the extra crap

[SyncroS8]

I want the immobiliser.

The vehicles that I put these engines into are often stolen for parts so if having the knowledge that I have the key with me and without it, the van can't easily be stolen is a good thing.

I know that people can get around them but most thieves won't be expecting for this type of vehicle to actually have an immobiliser at all so they won't be prepared.

MG

[Delboy]

I see, well have you considered building what you need, plugs and connectors are fairly reasonable if you don't need a car load of them.

Sounds like an interesting project.

[SyncroS8]

If I can't get the loom parts from one source then I may just buy the plugs and connectors from Audi.

MG