A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Body and Exterior

D2 - Body and Exterior Bumpers, bonnets, glass, trims - Everything outside

Reply
 
Thread Tools Display Modes
  #1  
Old 29th December 2014, 01:09 PM
Yas's Avatar
Yas Yas is offline
Member
 
Join Date: May 2014
Location: Essex
Posts: 44
Default Replacing windscreen washer pump

Hi peeps,
I have been searching how to replace the wind screen washer pump, but can't find the answer I need.

Can anyone here please advise me how to replace the this part? I have tried from the top, under the bonnet, but can't get to it.
My mechanic had a quick look for me (as a favour) and removed the offside wheel and arch liner. Still can't get to it and he now thinks that maybe the bumper needs to come off for access. Is this right?

Any advice would be great!
Thanks
Yas
__________________


1999 Audi S8
1995 Audi URS6 Avant 2.2t
1993 Audi Cabrio 2.3 5cyl
1992 Audi 100 Quattro 2.8v6
2003 Skoda Octavia Elegance TDi
Reply With Quote
  #2  
Old 29th December 2014, 05:21 PM
notorious's Avatar
notorious notorious is offline
Senior Member
 
Join Date: May 2010
Posts: 2,147
Default

yes, this is bumper off job.
__________________
I'd rather drive on left
Reply With Quote
  #3  
Old 29th December 2014, 06:04 PM
mikes2 mikes2 is offline
Member
 
Join Date: Oct 2010
Posts: 73
Default

I did it without removing the bumper.

remove the liner.
move the airbox to the side
undo the nuts holding the bottle
lift the bottle up for access to the pump
__________________
2002 3.7 quattro sport (SOLD)
Reply With Quote
  #4  
Old 29th December 2014, 06:36 PM
notorious's Avatar
notorious notorious is offline
Senior Member
 
Join Date: May 2010
Posts: 2,147
Default

Did you have to remove the headlight to lift the bottle up for access?
Just curious...
__________________
I'd rather drive on left
Reply With Quote
  #5  
Old 30th December 2014, 09:44 AM
mikes2 mikes2 is offline
Member
 
Join Date: Oct 2010
Posts: 73
Default

No - never disturbed the headlamp. the bottle comes up at an angle and needs to be rotated slightly
__________________
2002 3.7 quattro sport (SOLD)
Reply With Quote
  #6  
Old 30th December 2014, 10:35 AM
Norretal's Avatar
Norretal Norretal is offline
Senior Member
 
Join Date: Nov 2012
Location: County Durham
Posts: 1,480
Default

Are the PF and FL different? I had my PF washer pump replaced and I don't remember the garage saying it was much of a job, they certainly didn't charge me much labour. In fact I had that same pump replaced under warranty by an Audi main dealer and they didn't make a fuss either, I certainly don't remember the bumper being removed.

I borrowed this that Adrian previously shared, confirms what Mike said to a degree
Attached Files
File Type: pdf 98 A8 washer bottle removal.pdf (67.4 KB, 596 views)
__________________



Audi D3 S8 - 2007 - V10. B&O, Phantom Black, black and silver interior, and still completely standard with everything working as it should

Audi TT - 2015 - Ultra
Reply With Quote
  #7  
Old 28th December 2015, 06:41 PM
Sir WIll Sir WIll is offline
Senior Member
 
Join Date: Jan 2013
Posts: 555
Default

Just removed mine as it was dead, all of a sudden no windscreen washers.

Wanted to remove it so I could check it on the bench to confirm and get the right part number (4A0955651B).

Nice amount of rust coloured dribbles coming from it so no wonder it died!

New one ordered for £10, only small headache I can see when fitting the new one is the pipe that goes up to the washers themselves.

I suspect at least 8 minutes of swearing when the new pump is installed.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.