#11
|
|||
|
|||
being a V6 owner (and therefore impartial!) might I suggest the exchange is supplied with gaskets? Nothing worse than having to mess about with grotty old gaskets and risking leaks when refitting!
|
#12
|
|||
|
|||
sorry i forgot to mention it will have a new gasket for refitting.
|
#13
|
||||
|
||||
excellent work Guy, can you please post some pics of the replacement parts.
I found a thread on quattroworld where a guy did a similar solution but a bit more extreme, he machined the intake flap shafts. http://forums.audiworld.com/forumdisplay.php?f=8 |
#14
|
|||
|
|||
i could not find it with your link Goran maybe you can go on the thread itself and post the link to that, yes i will post up some pictures when my phone is back from car phone it had a software problem so its being fixed and im using an old school Nokia at the moment
|
#15
|
||||
|
||||
sorry, that looks like the wrong link it says audiworld, oops.
hope this one works. http://forums.quattroworld.com/a8/msgs/181.phtml |
#16
|
|||
|
|||
simmilar to what i have done but i have made them with PTFE and made the whole thing from scratch rather than making an insert for what was there i have made the whole thing and press fitted it on and used a bonding agent that withstands high temprature, and i have also made new inserts for the other end bushings and that combined has made the movement so free that there will never be any excess strain to cause the linkage to snap, i will offer a full warrenty with my service, i will try my best to get some pictures together for you to see.
also if any one would like to place an order with me or for any more info PM me or daviesbike@yahoo.co.uk 07776246886 hopefully when its sorted mike may well make it a sticky if i start a new thread offering the service |
|
|