A8 Parts Forum  

Go Back   A8 Parts Forum > General Motoring > VCDS (aka Vagcom)

VCDS (aka Vagcom) For all your electronic debug / diag advice queries and mods.

Reply
 
Thread Tools Display Modes
  #1  
Old 11th March 2018, 07:05 PM
Leorio Leorio is offline
Junior Member
 
Join Date: Mar 2018
Posts: 11
Default A8 D3 Values in Adaptation Mode

Can someone post Adaptation values in VCDS that he has in channel Climatronic (Auto HVAC) please? Also if that's not a problem if someone has working Webasto please post coding of your Aux Heating and Adaptation Values as well.

Thanks!
Reply With Quote
  #2  
Old 11th March 2018, 07:52 PM
tc4332's Avatar
tc4332 tc4332 is offline
Senior Member
 
Join Date: May 2014
Location: Wigan, Greater Manchester, UK
Posts: 2,323
Default

The settings depend on what you are trying to do.

Have you read this thread?
http://forum.a8parts.co.uk/showthread.php?t=13803
There are two important Aux Heater settings in the PDF attached to the thread.
I did get rather deep into this area last year but I've mislaid all my notes whilst spending visiting hospitalised wife. Now she's back home I am having trouble finding them. Daughter-out-Law tidied everything = lost.
__________________
Ray at Wigan Pier

2014 A8L D4 4.0TFSI Gold (Sticker says "Beige") Can't leave you in a black smoke cloud anymore..
In progress, Nothing left to do.



Gone 2004 A8 D3 3.0 TDI. Ebony Pearl Black (with little bits of other colours and glitter)
Reply With Quote
  #3  
Old 11th March 2018, 08:06 PM
Leorio Leorio is offline
Junior Member
 
Join Date: Mar 2018
Posts: 11
Default

What I am trying to do is to finally get the Webasto working. Short story it was working automatically without any controls in MMI, and was affecting fuel consumption and temperature gauge. I managed to enable controls, temperature gauge and fuel consumption was fixed but there was no icons from Aux Heating in the cluster. I fixed that too, Webasto is working, controls and timer as well, but the problem is that if I set the timer it turns on but have very low air output and blowing cold air. But when I turn ignition on it starts working properly and inside is warm straight away. So my guess is that I have something wrong in one of the Adaptation Channels in Auto HVAC.

I know that in one week I won't probably need it for a long long time, but I hate when something is not working as it should. That's why if you have any ideas I will be grateful.
Reply With Quote
  #4  
Old 12th March 2018, 07:01 PM
tc4332's Avatar
tc4332 tc4332 is offline
Senior Member
 
Join Date: May 2014
Location: Wigan, Greater Manchester, UK
Posts: 2,323
Default

Hi Leo,
Apologies, very busy week.
I'll do a dump for you over the weekend and see what we have.
Somebody else will hopefully put their oar in before then.
I have a meeting in Chepstow and a funeral in Saltash this week.

Ray
__________________
Ray at Wigan Pier

2014 A8L D4 4.0TFSI Gold (Sticker says "Beige") Can't leave you in a black smoke cloud anymore..
In progress, Nothing left to do.



Gone 2004 A8 D3 3.0 TDI. Ebony Pearl Black (with little bits of other colours and glitter)
Reply With Quote
  #5  
Old 13th March 2018, 10:41 AM
Leorio Leorio is offline
Junior Member
 
Join Date: Mar 2018
Posts: 11
Default

That's perfectly fine, no rush . Thanks.
Reply With Quote
  #6  
Old 19th March 2018, 01:25 PM
tc4332's Avatar
tc4332 tc4332 is offline
Senior Member
 
Join Date: May 2014
Location: Wigan, Greater Manchester, UK
Posts: 2,323
Default

Here you are Leo,
As per your request.
Attached Files
File Type: txt adpmap-08-4E0-910-043-A.txt (9.8 KB, 557 views)
File Type: txt adpmap-18-4E0-910-105.txt (9.9 KB, 478 views)
__________________
Ray at Wigan Pier

2014 A8L D4 4.0TFSI Gold (Sticker says "Beige") Can't leave you in a black smoke cloud anymore..
In progress, Nothing left to do.



Gone 2004 A8 D3 3.0 TDI. Ebony Pearl Black (with little bits of other colours and glitter)
Reply With Quote
  #7  
Old 19th March 2018, 03:51 PM
Leorio Leorio is offline
Junior Member
 
Join Date: Mar 2018
Posts: 11
Default

Thank you mate!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:50 AM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.