Help with retrofitting auto lights

[Somerandomguy]

Its also pretty easy to get to the module to change it, theres just a few screws to remove (some are under the centre dash trim). What really confused me is that my module happily accepted the coding, so I dont think I would ever have figured that a new module was needed.

Good luck with yours

[mcs]

I fitted the new central elec module. I had to recode it, but all is working as it should! It's very handy having fully automatic lights again.

Mike

[mcs]

Ok, so apparently if you replace the J519 Central elec module, you have to run through a basic settings thing for the power steering column adjustment. Mine decided it would only go up 10mm and it wouldn't self lift when exiting the car.

I know the column is fine as it adjusts all the other ways. And it does lower and lift, just only 10mm.

Anyone else had to do this?

[Delboy]

I have not but I have heard of coloums that stop working for no apparent reason that are remedied by doing the basic setting.

[Somerandomguy]

I haven't noticed it doing this, but I don't really pay attention to the steering column.

I'll have a look at it this afternoon to see if mines the same

[mcs]

The basic adjustment reset for the J519 sorted it.

The column now has all the travel back.

I love the VCDS system!!

Mike