|
D3 - Fuel and Exhausts Everything to do with getting fuel into the engine, and fumes back out again |
|
Thread Tools | Display Modes |
#31
|
||||
|
||||
On the PR codes for your car, next time your in Audi give them your reg / chassis number and they can print the PR code list with descriptions for your car .
__________________
Del |
#32
|
||||
|
||||
Quote:
http://forum.a8parts.co.uk/showthrea...8484#post68484
__________________
2006 D3 S8 5.2 V10 Ceramic Brakes, Bang&Olufsen, DTV, DAB, Rear Camera, BT, TPMS, Soft Close, Auto Boot, AMI , 4 Zone AC, Home Link, All Electric Blinds, Fingerprint, Ski Hatch, Black Extended Leather, Heated Sport Seats, Alacantra, Carbon Trim inc Aluminium Pack 2. 2015 A3 S line 1.4 TFSI - for the missus to keep her away from my car. Standard S-line equipment, no extras. 2006 D3 A8 3.7 V8 - SOLD but not forgotten |
#33
|
|||
|
|||
Quote:
I had a look underneath at the weekend there and they arectually welded on, not jubilee clips. As shown in the diagram earlier on there are what appears to be 2 downward swept trims as standard, one on top of the other. The "straight" pipe behind them is actually oval I think, which wont make for easy connecting. Did you measure the diameter of the main downswept trim? |
#34
|
|||
|
|||
Hello Lyons
No never got them done We have a local exhaust place called exhaust a fix, they quoted me £180 to take off the trims and weld on 3" slashed tips, just today went through to get the car booked in and they said it was £180 a side ?? No way ?? So still looking Mine are also welded on |
#35
|
|||
|
|||
Still haven't got mine fitted either. I've attempted it a couple of time but given up on both occasions.
I've decided the easiest way to do it is to take the existing down swept trim off (held on by 2 spot welds), cut them, slide on new trims, then reweld to car. |
|
|