|
|
#11
31st March 2014, 02:30 PM
|
||||
|
||||
Just checked through previous logs and found one that I posted here in September, with the original ABS pump. It's not exactly the same, but is a G201 error:
01435 - Brake Pressure Sensor 1 (G201) 48-10 - Supply Voltage - Intermittent Have Googled that and some people are suggesting a faulty brake switch. The brake switch works and all three lights come on, but I suppose it's worth a shot.
__________________
2001 A8 D2 FL 3.7 Q - LPG Conversion, Engine: AKC, Gearbox:FBB, Colour:LY5X Aqua Blue pearl effect, Interior:WJ light beige/dark beige valcona leather with burr walnut inserts My DIY jobs - Replaced alarm horn, Replaced Coolant Temp sensor, Updated RNS-D firmware, Installed Reversing Camera and Digital TV, Dashcam Installation, Retrofitted Rear Blinds, Auto-Dimming Rear View Mirror, Chrome Boot Struts Sold!  2008 S8 D3 5.2 V10 - Engine: BSM, Gearbox:KLW, Colour:LY7F Suzuka Grey Pearl Effect, Interior:Black/Black with Silver/Black valcona leather with carbon atlas inserts, Bang & Olufsen, Heated windscreen, Soft-close doors, TV, DAB, AMI, Quad Zone, Auto Boot, Auto dim Mirrors, Keyless entry, PDC with rearview camera, AFS II HeadlightsMy DIY jobs - Fan Jet Windscreen Washers, Retrofitted Electric Side Blinds 
|
|
#12
31st March 2014, 02:49 PM
|
|||
|
|||
|
Pressure sensor is in the ABS pump, brake switch is a different fault code.
__________________
Currently 8less 2011 Q7 S Line 3.0TDI, 2016 Tesla Model S 90D 8 history: 2006 A8 Sport 4.2TDI quattro SOLD, 1997 S8, reached end of life with gearbox failure
|
 |
|
|
Linear Mode
