A8 Parts Forum  

Go Back   A8 Parts Forum > A8 D2 > D2 - Engine Bay

D2 - Engine Bay Everything under the bonnet

Reply
 
Thread Tools Display Modes
  #1  
Old 19th October 2020, 06:19 PM
Markiii Markiii is offline
Senior Member
 
Join Date: Oct 2018
Location: Stevenage
Posts: 282
Default That bloody oil cooler pipe

I suspect I'm going to need this as i have a coolant loss issue developing.

I already have the gruvenparts pipe ready to go.

Before I start are there any must do jobs whilst I'm in there? Would rather not complete only to have to strip things down again the week after if something else breaks
Reply With Quote
  #2  
Old 19th October 2020, 07:12 PM
Regulus Regulus is offline
Senior Member
 
Join Date: Apr 2017
Location: Varmland, Karlstad region, Sweden
Posts: 484
Default

You will need the ring to the cooler tube as well, and the one that looks kind of like an 8. Unless I am mistaken.
I looks like your pipe has the 4 o-rings.
__________________

Johannes
_________
Audi S8 -99, Pearlescent, Alcantara/silk napa leather, Burr walnut insert, Alcantara roof lining upper pack
A8 32V engine
-----
Jeep Grand Cherokee -98
Reply With Quote
  #3  
Old 20th October 2020, 08:06 AM
spannerrash spannerrash is offline
Senior Member
 
Join Date: Dec 2016
Posts: 399
Default

Not exactly oil cooler related but when I did mine I also replaced the alternator brush and regulator pack. You will have to remove the alternator for access to the cooler so to me it just seemed worth doing whilst off.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:10 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.