Twin exit bumpers

[Davie b]

Hi guys , I'm booked in for a stainless exhaust system next week and like the idea of a twin exit system but don't like the idea of cutting a hole in the bumper / diffuser part to accommodate it .
So my question is was there/ is there a bumper that came with built in twin exit slots that I can fit , are there any after market ones and if so where do I get them and also does the whole rear bumper need replacing or can you just get the plastic lower skirt/ diffuser part and change that with the original one ,
Cheers
Dave+++

[notorious]

I don't think these were available as standard. Even on D2 w12.

[Goran]

The best way to do it is to get another lower (unpainted) bumper, preferably used perhaps from A8 parts. Cut out the nicely shaped exhaust opening, cut a similarly shaped hole on the right hand side of one of the skirts, and plastic weld it on. Do some filling/finishing, take it to your local paint shop and get it painted the colour you want.

This is what I'm planning to do with mine as I have a dual exhaust.

[Architex_mA8tey]

Hofele in Germany do a passable rear bumper you could look at - see link HERE (http://www.hofele.com/sport_en/produkte/audi/audi_a8_d2/audi_a8_d2_karosserie.html) for more details.

http://forum.a8parts.co.uk/attachment.php?attachmentid=6278&stc=1&d=1371759827

http://forum.a8parts.co.uk/attachment.php?attachmentid=6279&stc=1&d=1371759827

http://forum.a8parts.co.uk/attachment.php?attachmentid=6280&stc=1&d=1371759827

[Davie b]

Cheers mate ,
I like that lip spoiler as well+++