![]() |
Quote:
|
Is Botang's Hole on the to do list MJ? Should be easy with the electrics out
|
Botang's hole is done +++ That's how I discovered the wiper mechanism was worn out.
|
I should have known you'd have it sorted! :)
|
amazing work Michaela what cleaning products and methods are you using on the alloy parts? anything i try is useless or to harsh. Dave
|
Degreaser then Machine Mart aluminium cleaner which is acid-based. Spray on, work in with a washing up brush, repeat 2-3 times, wash off with water. If there is corrosion on the surface, work in the cleaner with a fine wire brush. I'm quite lucky with this one - there is very little oxidisation on the engine since it's all been so oily!
|
This evening's pinch bolt removal went rather better.
Start off like this again: http://www.corradov8.com/pics/h10ean/h10ean_154.jpg then keep winding the nut and it pulls the bolt out of the hole. Add more washers and carry on http://www.corradov8.com/pics/h10ean/h10ean_159.jpg Cut a couple of cm off the bolt otherwise it gets stuck on the steering arm, and repeat the process http://www.corradov8.com/pics/h10ean/h10ean_160.jpg Eventually the bolt will start turning with the nut. At that point it can be punched out http://www.corradov8.com/pics/h10ean/h10ean_161.jpg (there's a prize for whoever guesses who was keeping me company in the workshop tonight btw :D ) Both uprights are ready to be cleaned up and re-fitted so I put the new control arms on. http://www.corradov8.com/pics/h10ean/h10ean_162.jpg CV boots on both front shafts tomorrow then put the uprights and brakes back on. |
Quote:
|
Quote:
|
Quote:
Was it a cat? Our was it a person who owns the legs in one of the photos? |
All times are GMT. The time now is 02:13 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.