Updated list:
Tintin
Hpsauce
MJ
David'S8
monkeyboyuk
The Laird
RICKY D
Zip

Had to check &...can I join the list as well please?

Updated list:
Tintin
Hpsauce
MJ
David'S8
monkeyboyuk
The Laird
RICKY D
Zip
Sit down, Waldo
Spanker X5

I think every active D2 member of the forums has signed up, so I'll email the 'lucky winners' on Thursday with details.

Last few days to sign up :)

Are there other Audi's with the same controls then, or is this unique to the D2? I reckon you could do some good business at the Vorsprung International meeting.

The switch is shared with loads of earlier stuff - 80, 100, Coupe, V8 etc. The meet organisers get a bit grumpy about selling stuff out of your boot at the show, but you could hand out pre-orders.

Will the normal seat movement controls still work as normal, and what about the key-linked memory?
Just wondering as mine is due for an MOT very soon and a non-moving drivers seat is usually a failure these days!

Manual seat controls will still work fine.

As for the key, we'd have to try it. I'm not sure if the memory on/off switch is normally open or normally closed. It may be that with the buttons removed, memory is full disabled. I'll have a look at mine later.

I'm pretty sure seat adjustment will work without the control panel.
When i retrofitted my twin pane windows, i had the driver side door card off, and still was able to adjust the driver seat.

I think i will just stick to the forum, and do the current batch of panels, if someone else ever needs one doing, I can do it but it will be at a higher price.

Key memory does not function with the switch removed so the on/off switch on the panel does appear to be an 'enable' function, rather than 'disable'. Manual controls still work just fine.