Yes you can but you'll have to search hard to find a fridge...they're pretty rare to find and I've only ever seen 1.

Oli

Most definitely not! Have measured to check ;)

Have been a little quiet on the forum of late due to a house renovation but having had the aircon recharged twice in 4 months, a leak was attributed to a leak in the aircon condenser which had a significant stone chip.

A new condenser & £400 later and it's fixed and icey cold again :)

I just wanted to thank Dave@A8parts as they were brilliant but unfortunately my garage went with a local supplier in case the part fails within the warranty period - I think my garage will be using A8Parts for future needs though and they were very impressed with them +++

That's another thing ticked off the list.

Next will be a full front end resprayed from KDS - i had to book it 3 months in advance (they're that popular given their detailing expertise) and it's going in over the next 2 weeks.

If you haven't seen it before, Kelly@KDS became famous after doing this Audi A8 to S8 conversion. He is the wet sand master and having recently done a KDS detailing course with a mate, very very knowledgable..

Watch this space +++

Oli

Just a few pics of the S8 grille being prepped before it gets fitted...

Before:

https://farm3.staticflickr.com/2910/...d0d474c384.jpg

Taking off the S8 logo from the backing plate so it can be re-used:

https://farm6.staticflickr.com/5280/...6292096b45.jpg

Made a handsaw and took off the screw holes on the back of the new Quattro badge:

https://farm6.staticflickr.com/5494/...f191384888.jpg

https://farm6.staticflickr.com/5538/...67d140de5e.jpg

Trial fit:

https://farm3.staticflickr.com/2902/...c94efd8767.jpg

Letting the magic of Araldite do it's thing:

https://farm3.staticflickr.com/2919/...497934ea3c.jpg

After:

https://farm3.staticflickr.com/2930/...ef43a1b137.jpg

https://farm3.staticflickr.com/2899/...ab37424d0b.jpg

Just dropped off the 8 with Kelly @ KDS just now for the front end respray...

...can't wait to get it back! :D

So unfortunately the front end respray didn't work out. There had been a miscommunication and the costs we're going to be in excess of what i wanted to pay for it.

That said, I'm glad as whilst i still want the bumper done, I managed get some great results on the bonnet and boot lid using Meguiars' DA correction system (see here a great link explaining it on YouTube). I can't say enough good stuff about this system:

http://www.detailedimage.com/product..._1_lw_2462.jpg

Overall, when you get the Megs G220, special backing pad, cutting/finishing pads and cutting and polishing compound, the results are near perfect...astonishing given we're talking about a DA here, not a rotary.

It took me the best part of 4 hrs to wash and clay the car and then correct the bootlid and bonnet but it was very rewarding seeing the difference. It also gave me an excuse to use a new toy - a sun light - an absolute must in order to see the swirls when you haven't got the sun out.

https://farm4.staticflickr.com/3840/...bf45f49a_z.jpg

Some snowfoam action:

https://farm4.staticflickr.com/3842/...ea0c0237_z.jpg

Priming the cutting pad with the cutting compound - this stage does 95% of the work which then is following by the finishing pad and compound:

https://farm3.staticflickr.com/2927/...8497d4c1_z.jpg

A little video with sun-gun of half-the bootlid - now with swirls removed...+++

http://youtu.be/XYDlR-zP-_8

The bootlid done:

https://farm4.staticflickr.com/3906/...f9b9b7d9_z.jpg

Bonnet - the right side done as you stand in front of it:

https://farm3.staticflickr.com/2916/...69f0e9b9_z.jpg

Before:

https://farm4.staticflickr.com/3840/...51f30bd4_z.jpg

After:

https://farm3.staticflickr.com/2929/...2f7c49f4_z.jpg

Video with sun-gun of bonnet half done:

http://youtu.be/302L4nWDrlQ

The finished article:

https://farm3.staticflickr.com/2917/...4e6ea50f_z.jpg

Overall, a big thumbs up from me on this system...Audi paint is hard as nails and so trying to remove swirls is always going to be tough - especially with a DA. This however is a great bit of kit and should suit the majority of enthusiasts.

Now just to do the sides and roof... http://www.detailingworld.co.uk/foru...ies/buffer.gif

Great work Oli, I loved this car when you first got it but it just keeps getting better and better! I hope to see it again in the flesh eventually, it must look stunning :love:

Thanks Norretal - I must admit the longer i have it, the more i love it :)

That said, I am envious of your v10...it looks stunning in grey! :love:

Im buying a DAS6 soon to get the swirls out of mine - Black is a nightmare!

Gonna use ultimate compound me thinks ;)

Awesome Palmer - let us know how you get on - would love to see the befores and afters :)

Oli

Hi,

Unfortunately, a previous paint job (pre ownership by Ian or myself) on my 8's bumper and wing had been poorly done and left the front end looking tatty. Poor painting, lack of shine and depth, over-spray, and the usual stone chips were all visible. For someone that loves his 8 clean and detailed, it's torture! :hammer:

Having looked at a few garages, I settled on a local one and just wanted to share a quick work in progress of the 8 looking sorry for itself as it undergoes its front end respray (bumper and wings). The bumper is being prepped and the wings have been sanded back down.

Getting the paint code for Audi Exclusive paint was a bit of a pain...the build sticker does not feature it so a few calls to Audi and Ingolstadt and we now have a paint code.

Once the bumper goes on, it will also get the new S8 grille fitted.

Watch this space :)

Oli

https://farm4.staticflickr.com/3906/...0398938e57.jpg

https://farm4.staticflickr.com/3917/...35d1fb0c78.jpg