D3 front bumper and grill 2003 model in grey
 

this was on my old D3 53 reg small grill A8
i converted it to a BIG grill version
its been in my shed a few years
finished in grey
good condition
front bumper and front grill
£50

ive still got this
having a clear out
D3 pre-facelift front bumper and front grill

£50

Does it have the lower centre grill, I am looking for an ACC version with the square section in the centre for the ACC sensor.

i think so i will check tommorow

yes the bumper still has the lower grill but no ACC sorry

Thats a shame, my occasional search for an ACC grill continues.

tell you what i do have is a brand new in box ACC square unit that is behind the grill

That bit I do have, just the wrong grill in front of it.

I Have a Solution for both of you ... I have a PF D3 Black with an ACC panel :) that could be sold to manny and i can have the non ACC bumper

Now there is a possibility.

please excuse the excessive cropping but for security reasons i must crop it

but you get the idea of it

http://i866.photobucket.com/albums/a...psb7f4ffd0.jpg

I dont have ACC but i have the ACC bumper for some unknown reason.

the only thing i was not sure of is that the lip underneath has no mesh in it its open with slats and i thought it should have mesh but maybe they are all like it ive no idea


any pics of yours at all ?


or roberto's ?

This is the non ACC grill I have (I have ACC), it has slats all the way across. Roberto's grill will be the same but on a black bumper.

mine seems to be missing the long black strip along the bottom yours looks almost like mesh all along where as mine seems to have a few slats and nothing more thus you can see through it to the floor ?


hmmm not sure it would be good enough for you really ... i know there are rare as hens teeth to get hold of but it seems like its missing the small grill ?

The centre grill with the ACC solid blank is only held in place by clips around the edge (its the one just beneath the registration plate, like on the D2 and is the only part I require. You are right though, looking at your picture with regards to the lower part. I believe that also just clips in, but from behind. Just taken a closer picture.

Sorry Roberto for the discussion here.

Manny can you pm me your number please so I can give you a call about the grill ect ...

Reserve it for us roberto first dibs please

ok no probs

I've sent you a PM.

Oh I also am missing the wiring loom for the front parking sensors for some reason... I think the previous owner had a new bumper fitted with ACC panel and missed out re installing the loom. I have a box full of pdc sensors in silver so if any are duff I have plenty .. just cant find a loom .....

picture
 

Sorry to resurrect on old thread but is this bumper still available please?

If so I actually only need the full width black grill from the lower lip section if you would be willing to split it? let me know

I'm based in Cheshire

Thanks

I bought the bumper from Rob.
However i do have the full plastic trims you need from my old bumper if you need them ?

Great - as I say I just need the lower lip black plastic full width grille. Somehow I've got 3 broken vertical slats in mine!!?

Whereabouts are you and how much do you want for it?

Thanks
Joe