|
D2 Bumper
1 Attachment(s)
|
quite like it , it doesnt go over the top very clean
|
better than the Hoefele one! :rolleyes:
|
Does it for me. I want one! Do you have a link to the supplier?
|
Not a bad kit for a D2... Could do with a couple more angles, but a promising start.
|
It's made from fibreglass by company in Latvia that I used to work in for a short while I will see if I can get more pictures.
|
And a price? Maybe your missus can bring some back in her handbag! ;)
|
Now that's an aftermarket D2 front bumper that actually looks good.
|
It looks terrible.
|
4 Attachment(s)
Well it looks like they don't want to sell anything or have way too much job as I haven't got response to my e-mail.
Shipping seems to be a bit costly, estimate from DHL came at £1200 and no that's not a mistake with extra 0 at the end. Mike if you or anybody else is interested I should be able to arrange alternative delivery method and it should not be more then £200 for bumper delivered to my door or possibly to yours. I have to say I quite like it but it is a FL bumper and and would not fit mine quite right. They also do fibreglass copies of stock bumper for both PF and FL. http://forum.a8parts.co.uk/attachmen...1&d=1350072890 http://forum.a8parts.co.uk/attachmen...1&d=1350072890 If anybody is interested let me know and I will phone them to check for more details and look in shipping details. And some other bits http://forum.a8parts.co.uk/attachmen...5&d=1350072642 http://forum.a8parts.co.uk/attachmen...1&d=1350072942 |
Would have been awesome to have just the lower apron made to fit the stock FL top part with kind of the same lines going on. And still utilize the stock lower grill, fog light's and fog grills. I have been playing with the thought of brushing up something in photoshop and having it made up somewhere.
|
Quote:
What is the price on that one? I live in Sweden.. I need a new bumper but with higher/bigger air intake on the side to get more air to my RS6 IC's in my S8 And this one in fiberglas is easy for me to modify +++ I found another one but I don't like the look on this one: http://migastyling.com/en/p/2833/aud...nt-bumper-wr-s |
Price would be around EUR200, the problem is shipping to Sweden. I could arrange fairly cost effective delivery to UK but to Sweden it looks like delivery will cost more then bumper. Also that is made for FL car so would need some modifications to fit on PF. If You are interested PM me your address and I will see what I can find out about shipping.
|
I am getting one of these. If anybody else like one at the same time I might be able to negotiate better price. Currently looking at around £140-150 delivered to my house. It's somebody with a van coming from Latvia that will bring it to me so pickup or delivery still need to be arranged within UK.
http://forum.a8parts.co.uk/attachmen...1&d=1349635224 |
2 Attachment(s)
|
|
| All times are GMT. The time now is 01:04 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.