![]() |
S8 undertray - what nuts and rivets?
For some odd reason this large front undertray seems to be made out of an absorbent felt. After all the rain and spray on the roads for the last few days my undertray has sagged, caught something on the road and is as good as ruined and unusable now.
Bought a new one (hard plastic this time) but also need to get all the correct fastenings and rivets. This is from ETKA: http://vagfans.info/EN/audi/RDW/A8Q/...underbody-trim http://i67.tinypic.com/2cbqtf.png Not quite sure which ones I need?! There seems to be a lot! :Confused: |
I bought a bag of assorted ones from ebay...
http://www.ebay.co.uk/sch/i.html?_od...xings&_sacat=0 I'm not sure which one but it was from this site's sponsor. It had all the bits I needed, but not sure if it had everything you need if you had none at all. |
I would not recommend the eBay ones.
I bought a set and the heads ripped off after a jaunt down the motorway. Ended up getting a complete set from Audi. Bolts, clips and rubber. |
I now concur. I bought some ebay clips for a couple of quid, I could immediately see they would be useless so they went straight in the bin!
Had no choice but to get a set of them from Audi - £48 :mad: |
I think there is good and bad on eBay. They are not all bad and not all good. I replaced all my fittings in the summer. They appeared to me to be the exact same quality as the old ones I removed.
I can't be sure, but I think they were like item number 190778868956 http://www.ebay.co.uk/itm/190778868956?ul_noapp=true |
All times are GMT. The time now is 10:28 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.