RS6 V10 390MM Brakes
 

2 x Six piston Brembo calipers
2 X 390mm C6 OEM genuine Audi discs

The calipers are used but recently refurbished with brand new Brembo seals, and pistons. The calipers are in full working order and have not been on the car since they were refurbished with brand new genuine Brembo parts. They come with the original mounting hangers for the RS6, but these can be removed if you want to fit them on another car. They come with all the springs/clips and bolts required.

The discs are lightly used, I'll get more details and photos for anyone interested. I'm selling as I'm now planning on fitting OEM ceramic brakes to my car.

I'm looking at selling the calipers and discs together for the time being. I was quoted £470.69 each for calipers from Stoke Audi with discount, so here is a chance to get a good saving for what are mechanically brand new calipers and lightly used discs.

PM me with an offer.

how much do you want for them and are they the same as what david fitted to his W12 ?

A little late, sorry - but yes these are the ones I have...

Dead easy to fit to the D3, just a couple of copper tubes needed to be made up at the princely sum of £2.00 and the rest just bolted into place. They look good, and until the other evening that is about all I would have said......

....however they are absolutely excellent now they have a few miles on them. A spirited drive home the other night saw me cresting a hill to be face to face with two young ladies out jogging, and a car coming in the opposite direction left no room to play with - I slammed all on and stopped from 60 to zero in no time at all and actually had to wait for the two ladies to reach the car and jog past before I moved off again - simply because I totally over estimated the time it took to pull up !

It took far longer to fish everything out of the footwell when I got home than it did to stop :ROFL:

I keep meaning to do a 30-0 test to see just how little distance it would take to pull up from 30......

can you confirm the size for me please .....only i had mine looked at and gave the vin number to some one and they said mine are 385mm

how much do you want for the brakes ?
cheers

Sorry, yes - buy David's set up from A8 Parts. I'm not bothering with the ceramics now and have fitted these. I've done about 200 miles on mine but it was mainly motorway driving, they're getting better and hopefully they'll be to Dave's standard once fully bedded in with a few more miles on them!