Slight variation on this, one of the latch pins on mine broke, not the centre one but the one at the edge, the drivers side one actually. A8 Parts came up with a replacement which I fitted. Its either not adjusted properly or there could be a fault with cable as bonnet no longer pops open on that side, I suspect poor fitting on my part...though I did make sure it was adjusted to same length as the old one. Other side pops OK but drivers side wont budge, nor does centre pull lever pop out. Tried pushing on bonnet while cable being pulled etc but no joy. Anybody any tips on how to get access to a stuck bonnet please. I know I broke my own DIY rule of "know your limitations"
