Welllllllllll actually............
You have far more options if you play around with the dimensions a bit.
Have a read of this article and you'll see what I mean.
You can play around with offsets and spacers, diameter and aspect ratio to achieve the same effect. The important thing is that you maintain the same rolling diameter front to rear within 1%. And the same overall rolling diameter to maintain speedo accuracy.
If you need any help importing wheels into Jersey I will be happy to help as will other forum members. 
__________________
Conan (the Librarian)
Watch it if you dare
Currently,
2000 S8, Merlin Purple, Leather Pack 1, Winter Pack 1, SPAX adjustable suspension, AP Racing 6 pot front caliper, 385mm fully floating disks, EBC Yellow Stuff Pads, Black Diamond grooved rear disks and predetor pads, D2 Doctors Brake Block.
1997 4.2 A8SQ - the Projekt. 12 years and ongoing!
1997 4.2 A8SQ - Ming Blue. Restoration sat waiting; saved from the Scrapyard
2003 C5 Allroad 4.2Q - Cobolt Blue. Towing car. Laid up awaiting manual conversion.
2005 C5 Allroad 2.5TDi FE - Grey - Workhorse.
2015 Q3QS SLine - Daytona Grey. Lots of extras! Long Haired Admirals cutter.
Previously
2003 C5 A6 1.9TDI FWD - Loaner from D2 Doctor Lifex
1997 S8 - Ming Blue. Loaned out and written off. I loved that car. My first engine swap after cambelt failure.
1996 4.2 A8SQ - Ming Blue. 178k on a cambelt! Trader's 8. Delivered to A8Parts at Lifex.
2003 2.8 A8SQ - powder blueish. Fill in for a while. Sold on.
1998 1.8T A4 Avant FWD. Ming Blue (there's a theme here), PEX for the 97 S8.
And a list of non VAG going back 40 years before I saw the light.
Last edited by Conan_the_Librarian; 23rd August 2010 at 10:07 AM.
|