So, new baseplate installed, the tool added to allow the flexible filament to go through the feeder.
Spent some time getting the nozzle temp right so the filament will adhere to the plate and away we go:
Here is the base going down.
And the end result.
But - some of the base is stuck to the baseplate and I cannot remove it (tried using the scraper but it didn't budge) - MJ, have you had this and what did you do?
Cheers
__________________
Andy.
Current cars:
BMW i4 M-Sport
Peugeot 207 (the sons)
Triumph Daytona 675 (2017 reg)
===========================
Gone but not forgotten
Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023)
1972 T2 Bay Window Camper (Slow)
Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre
2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member)
2000 A8 FL QS 4.2 (with RNS-E - Nice  ) (Engine poorly so sold on to be brought back by someone who has the time)
Last edited by gninnam; 17th January 2019 at 08:07 AM.
|