Like your idea with the CR10 making sure that the Z couplers being aligned. Will look at doing that myself.
So far the last few prints have come out good so I am happy the bed is staying level (what I have done is put some masking tape in the middle of the plate as I know the glass bed is flat yet when setting up the leveling, no matter what I did the centre was always off.
Since adding the tape all is good
The Hypercube looks like it will be keeping you busy for a while.
Still getting to used to the CR10 (still happy with it also) before Ieven think of building something like that!
Cheers
__________________
Andy.
Current cars:
BMW i4 M-Sport
Peugeot 207 (the sons)
Triumph Daytona 675 (2017 reg)
===========================
Gone but not forgotten
Ford Focus ST-2 Mk3 (the wifes) (stolen Oct 2023)
1972 T2 Bay Window Camper (Slow)
Audi TT Mk1 225 - now with coil-overs and a 7inch touchscreen infotainment centre
2003 A8 Sport 4.2 (with ACC & LPG) (Feed up with all the issues so passed it on to a forum member)
2000 A8 FL QS 4.2 (with RNS-E - Nice
) (Engine poorly so sold on to be brought back by someone who has the time)